Advanced SearchSearch Tips
Fracture Behaviour Analysis of the Crack at the Specimen with the Type of Mode I Composed of the Bonded Carbon Fiber Reinforced Plastic
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Composites Research
  • Volume 28, Issue 6,  2015, pp.356-360
  • Publisher : The Korean Society for Composite Materials
  • DOI : 10.7234/composres.2015.28.6.356
 Title & Authors
Fracture Behaviour Analysis of the Crack at the Specimen with the Type of Mode I Composed of the Bonded Carbon Fiber Reinforced Plastic
Lee, Jung-Ho; Cho, Jae-Ung; Cheon, Seong-Sik; Kook, Jeong Han;
  PDF(new window)
In this paper, the carbon fiber reinforced plastic is processed as the double cantilever beam in order to estimate the fracture behavior of composite and is carried out with the static analysis as the mode I. The specimen sizes are 25 mm, 30 mm, 35 mm and 40 mm. And the material property is used with carbon. As the analysis result of mode I, the adhesive part is detached latest by the small force at the specimen thickness of 25 mm. The largest force is happened at the specimen thickness of 40 mm. The defection of the adhesive interface is shown slowest at the displacement of 9.75 mm at the specimen thickness of 25 mm. And the defection is shown quickest at the displacement of 7.82 mm at the specimen thickness of 40 mm. This defection is due to the fracture of specimen. The result of this study on the defection of the adhesive interface and the reaction force due to this defection is thought to be contributed to the safe structural design of the carbon fiber reinforced plastic.
Carbon fiber reinforced plastic;Double cantilever beam;Fracture behaviour;Adhesive interface;Defection;
 Cited by
적층각도에 따른 단방향 CFRP에서의 중앙 크랙의 파괴 거동에 관한 연구,박재웅;전성식;조재웅;

Composites Research, 2016. vol.29. 6, pp.342-346 crossref(new window)
Boang, S.O., Kim, K.S., Kim, S.H., Song, S.G., and Cho, J.U., "Study on Compression Test of Aluminum Foam and Honeycomb Sandwich Composites", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 12, No. 9, pp. 3802-3807, 2011. crossref(new window)

Blackman, B.R.K., Hadavinia, H., Kinloch, A.J., Paraschi, M., and Williams, J.G., "The Calculation of Adhesive Fracture Energies in Mode I: Revisiting the Tapered Double Cantilever Beam (TDCB) Test", Engineering Fracture Mechanics, Vol. 70, No. 2, pp. 233-248, 2003. crossref(new window)

De. Giorgi, M., Carofalo, A., Dattoma, V., Nobile, R., and Palano, F., "Aluminum Foams Structural Modelling," Computers & Structures, Vol. 88, Issues 1-2, pp. 25-35, 2010. crossref(new window)

Shin, K.B. and Koo, D.H., "A Study on the Evaluation of the Failure for Carbody Structures Made of Laminated Fiber-reinforced Composite Materials Using Total Laminate Approach", Korean Society for Composite Materials, Vol. 17, No. 1, pp. 18-28, 2004.

Blackman, B.R.K., Dear, J.P., Kinloch, A.J., MacGillivray, H., Wang, Y., Williams, J.G., and Yayla, P., "The Failure of Fibre Composites and Adhesively Bonded Fibre Composites under High Rates of Test Part III Mixed-mode I/II and Mode II Loadings", Journal of Materials Science, Vol. 31, No. 17, pp. 4467-4477, 1996. crossref(new window)

Hashemi, S., Kinloch, A.J., and Williams, J.G., "The Analysis of Interlaminar Fracture in Uniaxial Fibre-polymer Composites", Proc. R. Soc. Lond. Vol. 427, No. 1872, pp. 173-199, 1990. crossref(new window)

Paul, A. and Ramamurty, U., "Strain Rate Sensitivity of a Closed-cell Aluminum Foam", Materials Science and Engineering: A, Vol. 281, Issues 1-2, pp. 1-7, April, 2000. crossref(new window)

Mohamed, M., Anandan, S., Huo, Z., Birman, V., Volz, J., and Chandrashekhara, K., "Manufacturing and Characterization of Polyurethane Based Sandwich Composite Structures", Composite Structures, Vol. 123, pp. 169-179, 2015. crossref(new window)

Marzi, S., Biel, A., and Stigh, U., "On Experimental Methods to Investigate the Effect of Layer Thickness on the Fracture Behavior of Adhesively Bonded Joints," International Journal of Adhesion and Adhesives, Vol. 31, No. 8, pp. 840-850, 2011. crossref(new window)

Jung, J.W., Kim, S.H., Park, J.K., and Lee, W.I., "Research ofn the Development of the Properties of PLA Composites for Automatic Interior Parts," Korean Society for Composite Materials, Vol. 24, No. 3, pp. 1-5, 2011.