Advanced SearchSearch Tips
Design of eccentric forging process for camber bolts using finite element method
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Design of eccentric forging process for camber bolts using finite element method
Kim, Kwan-Woo; Qiu, Yuan-Gen; Cho, Hae-Yong;
  PDF(new window)
A new eccentric forging process for camber bolts has been suggested in this study. The camber bolt is manufactured by a two-step process: the typical forging process for normal bolts and the trimming process for the eccentric flange. The processes are performed under high forging load and generate a large amount of chip during trimming. A new forging process has been required in order to overcome these problems. The eccentric forging is the new process in which the load axis is offset from the central axis, as against central load applied in a typical forging process. The eccentric forging process could reduce forging load and save the amount of chip. In order to manufacture camber bolts by an optimum process, it is required to adjust the geometry of eccentric die and the offset from the central axis.
Eccentric forging;Camber bolts;Forging process;Finite element method;Trimming;
 Cited by
J. H. Kim, S. W. Chae, S. S. Han, and Y. H. Son, "Manufacturing process design of aluminum alloy bolt," The Korean Society for Precision Engineering, vol. 27, no. 5, pp. 63-68, 2010.

S. E. Song and H. H. Kwon, "A study on the cold forging development of guide valve for the fuel pressure regulator," The Korean Society of Manufacturing Technology Engineers, vol. 21, no. 2, pp. 331-336, 2012. crossref(new window)

S. J. Jang, M. C. Lee, S. H. Shim, Y. H. Son, D. J. Yoon, and M. S. Joun, "Finite element analysis of manufacturing process of a 12 point flange head bolt with emphasis on thread rolling process," Transactions of Materials Processing, vol. 19, no. 4, pp. 248-252, 2010. crossref(new window)

U. J. Jung, J. J. Lee, and G. J. Park, "A preliminary study on the optimal shape design of the axisymmetric forging component using equivalent static loads," The Korean Society of Mechanical Engineers, vol. 35, no. 1, pp. 1-10, 2011.

K. W. Kim, Y. T. Kim, W. J. Kim, and H. Y. Cho, "Finite element analysis for multi-stage forging process design of bolt with nonaxisymmetric washer cam," Journal of the Korean Society of Marine Engineering, vol. 32, no. 4, pp. 585-595, 2008. crossref(new window)

F. Schongena, F. Klockea, P. Mattfelda, S. Rjasanowb, and R. Grzhibovskisb, "FEM/BEM simulation of cold forging process considering presstool-workpiece inneraction," Procedia Engineering, vol. 81, pp 2403-2408, 2014. crossref(new window)

H. G. Lee, K. S. Shin, and Y. B. Park, "A study on process design of cold forging for cost-saving of asymmetric pinch yoke for automobile steering system," The Korean Society for Precision Engineering of 2013 Spring Conference, pp. 557-558, 2013.

W. S. Weronski, A. Gontarz, and Z. Pater, "The research of forging process of eccentric part on three slide forging press," Journal of Materials Processing Technology, vol. 177, no. 1-3, pp. 214-217, 2006. crossref(new window)