JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A study on fabrication of HNS remote sensor module with printed ITO films
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A study on fabrication of HNS remote sensor module with printed ITO films
Lee, Seok-Hwan; Cho, Sung-Min; Kim, Chang-Min; Kim, Hyeong-Ho; Yang, Han-Uk; Oh, Ji-Eun; Chang, Ji-Ho;
  PDF(new window)
 Abstract
In this study, we investigated the feasibility of using printed Indium Tin Oxide (ITO) film as a remote sensor for Hazardous and Noxious Substances (HNS). To improve the quality of the ITO films, binder mixing ratio, Sn concentration in ITO, thermal treatment temperature, and printing process conditions were optimized. We fabricated an electrical resistance-type liquid sensor, and to confirm the sensor operation, the change in resistance in air and seawater was monitored. The change in resistance of the ITO sensor was explained in terms of reduction reaction on the surface. Further, the sensor was controlled by Arduino, and the remote data acquisition was demonstrated.
 Keywords
Indium-Tin-Oxide (ITO);printed films;Arduino;electrical resistance-type sensor;Hazardous and noxious substances (HNS);
 Language
Korean
 Cited by
 References
1.
E. B. Lee, J. H. Yun, and S. T. Chung, "A study on the development of the response resource model of hazardous and noxious substances based on the risks of marine accidents in Korea," Journal of Navigation and Port Research, vol. 36, no. 10, pp. 857-864, 2012. crossref(new window)

2.
ITOPF, "Response to Marine Chemical Incidents", 2014, Available: http://www.itopf.com/knowledge-resources/documents-guides/document/tip-17-response-to-marine-chemical-incidents/ Accessed February 20, 2016.

3.
V. S. Vaishnav, P. D. Patel, and N. G. Patel, "Preparation and characterization of indium tin oxide thin films for their application as gas sensors" Thin Solid Films vol. 487, no. 1-2, pp. 277-282, 2005. crossref(new window)

4.
J. Blum, Exploring Arduino, California, U.S.A., A John wiley & sons, jnc., publication, 2013.

5.
J. H. Kang, K. M. Yu, S. O. Han, and K. W. Gu, "Precision measurement of silicon wafer resistivity using the four-point probe method," The Korea Institute Of Electrical Engineers, vol. 60, no. 7, pp. 389-391, 2010 (in Korea).

6.
S. M. Sze and K. K. Ng, Physics of Semiconductor Devices, John wiley & sons, 2006.

7.
J. Puetz and M. A. Aegerter, "Direct gravure printing of indium tin oxide nanoparticle patterns on polymer foils," Thin Solid Films, vol. 516, no. 14, pp. 4495-4501, 2008. crossref(new window)

8.
A. Pasolini, "Zeoform: The eco-friendly building material of the future?", http://www.gizmag.com/zeoform-cellulose-water/28796/, Accessed August 29, 2013.

9.
I. G. Lee and B. H. Noh, "Effect of process variables and exisisting ions on highly active nano-sized ITO powders prepared by precipitation method," Journal of Korean Powder Metallurgy Institute, vol. 15, no. 6, pp. 450-457, 2008. crossref(new window)

10.
C. S. Rout, M. Hegde, A. Govindaraj, and C. N. R. Rao, "Ammonia sensors based on metal oxide nanostructures," IOP Science Nanotechnology, vol. 18, no. 20, p. 205502, 2008.

11.
N. G. Patel and B. H. Lashkari, "Conducting transparent indium-tin oxide films by post-deposition annealing in different humidity environments," Journal of Materials Science, vol. 27, no. 11, pp. 3026-3031, 1992. crossref(new window)

12.
K. K. Makhija, A. Ray, R. M. Patel, U. B. Trivedi, and H. N. Kapse, "Indium oxide thin film based ammonia gas and ethanol vapour sensor", Bulletin of Materials Science vol. 28, no. 1, pp. 9-17, 2005. crossref(new window)

13.
J. Koo, S. Park, W. Lee, Y. Cho, H. Lee, S. Lee, and J. Chang, "Room temperature operation of ITO nano-crystal gas sensor," Physica status solidi (c), vol. 10, no. 5, pp 873-876, 2013. crossref(new window)

14.
I. Shalish, L. Kronik, G. Segal, and Y. Shapira, "Grain-boundary-controlled transport in GaN layers," Physical Review B, vol, 61, no. 23, p. 245401, 2000.

15.
S. D. Herzee, J. C. Ramer, and K. J. Malloy, "The Microstructure of Metalorganic - Chemical - Vapor - Deposition GaN on Sapphire," Materials Research Society Bulletin, vol. 22, no. 7, pp. 45-51, 1997.