Nonproportional viscous damping matrix identification using frequency response functions Min, Cheon-Hong; Kim, Hyung-Woo;
Accurate identification of damping matrix in structures is very important for predicting vibration responses and estimating parameters or other characteristics affected by energy dissipation. In this paper, damping matrix identification method that use normal frequency response functions, which were estimated from complex frequency response functions, is proposed. The complex frequency response functions were obtained from the experimental data of the structure. The nonproportional damping matrix was identified through the proposed method. Two numerical examples (lumped-mass model and cantilever beam model) were considered to verify the performance of the proposed method. As a result, the damping matrix of the nonproportional system was accurately identified.
Damping matrix identification;Complex frequency response function;Normal frequency response function;
G. M. Lee, Y. H. Ju, and M. S. Park, "Comparison of damping matrix estimation methods for model updating," Transactions of the Korean Society for Noise and Vibration Engineering, vol. 20, no. 10, pp. 923-930, 2010 (in Korean).
S. C. Park, Y. B. Park, K. I. Park, H. K. Je, and G. J. Yi, "Identification of damping matrix for a steel bar by the genetic algorithm," Journal of the Korean Society of Marine Engineering, vol. 35, no. 2, pp. 271-277, 2011 (in Korean).
C. H. Min, H. I. Park, and S. Y. Park, "Direct identification of non-proportional modal damping matrix for lumped mass system using modal parameters," Journal of Mechanical Science and Technology, vol. 26, no. 4, pp. 993-1002, 2012.
J. H. Lee and J. Kim, "Development and validation of a new experimental method to identify damping matrices of a dynamic system," Journal of Sound and Vibration, vol. 246, no. 3, pp. 505-524, 2001.
K. S. Kim, Y. J. Kang, and J. Yoo, "Structural parameters identification using improved normal frequency response function method," Mechanical Systems and Signal Processing, vol. 22, pp. 1858-1868, 2008.
S. Pradhan and S. V. Modak, "A method for damping matrix identification using frequency response data," Mechanical Systems and Signal Processing, vol. 33, pp. 69-82, 2012.
C. H. Min, H. W. Kim, C. H. Lee, S. Hong, J. S. Choi, and T. K. Yeu, "Identification of a nonproportional damping matrix using the finite element model updating," Journal of Ocean Engineering and Technology, vol. 26, no. 4, pp. 86-91, 2012 (in Korean).
V. Arora, "Structural damping identification method using normal FRFs," International Journal of Solids and Structures, vol. 51, pp. 133-143, 2014.
S. Y. Chen, M. S. Ju, and Y. G. Tsuei, "Estimation of mass, stiffness and damping matrices from frequency response functions," Journal of Vibration and Acoustics, vol. 118, no. 1, pp. 78-82, 1996.
M. I. Friswell, S. D. Garvey, and J. E. T. Penny, "Model reduction using dynamic and iterated IRS techniques," Journal of Sound and Vibration, vol. 186, no. 2, pp. 311-323, 1995.