JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Bond Strength Properties of Antiwashout Underwater Concrete
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Bond Strength Properties of Antiwashout Underwater Concrete
;;;;
  PDF(new window)
 Abstract
The objective of this study is to investigate the bond strength properties of antiwashout underwater concrete. The arrangement of bars (vertical bar, horizontal upper bar, horizontal lower bar), condition of casting and curing (fresh water, sea water), type of fine aggregate (river sand, blended sand(river sand : sea sand = 1:1), and proportioning strength of concrete (210, 240, 270, 300, 330kgf/)are chosen as the experimental parameters. The test results(ultimate bond stress) are compared with bond and development provisions of the ACI Building Code(ACI 318-89) and proposed equations from previous research(which was proposed by Orangun et. al). The experimental results show that ultimate bond stress of antiwashout underwater concrete which arranged bar on the horizontal lower, used the blend sand, and was cast and cured in the fresh water are higher that other conditions. The ultimate bond stress were increased in proportion to {{{{( SQRT {fcu }) }}3 2. From this study, rational analytic formula for the ultimate bond stress are to be from compressive strength of concrete.
 Keywords
antiwashout underwater concrete;ultimate bond stress;arrangement bar;fresh water;sea river sand;blend sand;
 Language
English
 Cited by
 References
1.
수중불분리콘크리트의 부착 강도특성에 관한 기초적 연구, 1999.

2.
한국농공학회지, 1996. vol.38. 6, pp.74-82

3.
日本土木學會, 1992. 541, pp.49-52

4.
ACI Materials Journal, 1995. vol.92. 3, pp.315-320

5.
수중불분콘크리트의 최적 물-시멘트비에 관한 실험적 연구, 1998.

6.
콘크리트학회논문집, 1995. vol.7. 1, pp.117-125

7.
ASTM C234-91a,American Society for Testing and Naterials, 1991.

8.
대한토목학회지, 1997. vol.45. 3, pp.71-77

9.
ACI Materials Journal, 1992. vol.89. 6, pp.593-601

10.
ACI Structural Journal, 1992. pp.709-720

11.
ACI Committee, 0000. vol.318. 89,