Advanced SearchSearch Tips
Pinching and Energy Dissipation Capacity of Flexure-Dominated RC Members
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Pinching and Energy Dissipation Capacity of Flexure-Dominated RC Members
Park, Hong-Gun; Eom, Tae-Sung;
  PDF(new window)
Pinching is an important property of reinforced concrete member which characterizes its cyclic behavior. In the present study, numerical studies were performed to investigate the characteristics of pinching behavior and the energy dissipation capacity of flexure-dominated reinforced concrete members. By investigating existing experiments and numerical results, it was found that flexural pinching which has no relation with shear action appears in RC members subject to axial compression force. However, members with specific arrangement and amount of re-bars, have the same energy dissipation capacity regardless of the magnitude of the axial force applied even though the shape of the cyclic curve varies due to the effect of the axial force. This indicates that concrete as a brittle material does not significantly contribute to the energy dissipation capacity though its effect on the behavior increases as the axial force increases, and that energy dissipation occurs primarily by re-bars. Therefore, the energy dissipation capacity of flexure-dominated member can be calculated by the analysis on the cross-section subject to pure bending, regardless of the actual compressive force applied. Based on the findings, a practical method and the related design equations for estimating energy dissipation capacity and damping modification factor was developed, and their validity was verified by the comparisons with existing experiments. The proposed method can be conveniently used in design practice because it accurately estimates energy dissipation capacity with general design parameters.
earthquake design;energy dissipation capacity;cyclic behavior;flexural pinching;damping modification factor;reinforced concrete;
 Cited by
에너지 소산능력에 기초한 철근콘크리트 부재의 이력모델,엄태성;박홍근;

한국지진공학회논문집, 2004. vol.8. 5, pp.45-54 crossref(new window)
ATC, 'Seisrnic evaluation and retrofit of concretebuildings,' ATC-40, Applied Technology Council,Redwood City, California, 1996

Building Seismic Safety Council, 'NEHRP guidelines for the seisnic rehabilitation of buildings,' FEMA-273, Federal Emergency Manage-ment Council, Washington, D.C, 1997

Brown, R. H. and Jirsa, J. O., 'Reinforced Concrete Beams under Load Reversals,' ACI StructuredJournal, Vol.68, No.5, 1971, pp.380-390

한상환, 이리형, '철근콘크리트 보통모멘트 골조 기둥의 거동평가', 한국콘크리트학회 논문집, Vol. 14, No.2, 2002, pp.199-206

Cheok, G. S., Stone, W. C, 'Behavior of l/6-ScaleModel Bridge Columns Subjected to Inelastic Cyclic Loading,' ACI Structural Journal, Vol.87, No.6,1990, pp.630-638

Wehbe, N. I., Saiidi, M. S., and Sanders, D. H.,'Seismic Performance of Rectangular Bridge Columns with Moderate Confinement,' ACI Structured Journal, Vol.96, No.2, 1999, pp.248-258

Saatchioglu, M., Grira, M., 'Confinement of Reinforced Concrete Columns with Welded Reinforcement Grids,'ACI Structural Journal, Vol.96, No.4, 1999, pp.29-39

Thomsen, J. H. and Wallace, J. W., 'Displacement-based design of RC structural walls'. An experimental investigation of walls with rectangular and T-shapedcross-sections,' Report No. CU/CEE-95/06

엄태성, 박홍근, '휨지배 철근콘크리트 부재의 에너지소산성능 평가방법,' 한국콘크리트학회 논문집, Vol.14, No. 4, 2002, pp.566-577

엄태성, 박홍근, '철근콘크리트 휨재에 대한 에너지 소산능력 산정식의 개발,' 콘크리트학회논문집, Vol.14, No.6, 2002, pp.989-1000

Priestley, M. J. N, 'Performance Based Seismic Design,' 2000, Proceedings of the 12th World Conference on Earthquake Engineering, Auckland,New Zealand, Jan. 30-Feb. 4