Advanced SearchSearch Tips
Mechanical Characteristics of Recycled PET Polymer Concrete with Demolished Concrete Aggregates
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Mechanical Characteristics of Recycled PET Polymer Concrete with Demolished Concrete Aggregates
Jo Byung-Wan; Lee Du-Wha; Park Seung-Kook;
  PDF(new window)
In this paper, fundamental properties of Polymer Concrete(PC), made from unsaturated polyester resin based on recycled PET and recycled aggregate were investigated. Mechanical properties include strength, modulus of elasticity, and chemical resistance. Resins based on recycled PET and recycled aggregate offer the possibility of low source cost for forming useful products, and would also help alleviate an environmental problem and save energy. The results of test for resin contents and recycled aggregate ratio we, first, the strength of Polymer Concrete made with resin based on recycled PET and recycled aggregate increases with resin contents relatively, however beyond a certain resin contents the strength does not change appreciably, Second, the relationship between the compressive strength and recycled aggregate ratio at resin has a close correlation linearly whereas there is no correlation between the compressive strength and the flexural strength of RPC with recycled aggregate ratio. Third, the effect of acid resistance at resin was found to be nearly unaffected by HCI, whereas the PC with recycled aggregate showed poor acid resistance. Unlike acid, alkali nearly does not seem to attack the RPC as is evident from the weight change and compressive strength. And last, In case of stress-strain curve of polymer concrete with of natural aggregate and recycled aggregate it is observed the exceptional behavior resulting in different failure mechanisms of the material under compression.
Polymer Concrete;PET;recycled aggregate;chemical resistance;stress-strain curve;
 Cited by
충전재 종류에 따른 PET재활용 폴리머콘크리트의 황산부식에 대한 강도 특성,조병완;신경철;박승국;

한국콘크리트학회논문집, 2005. vol.17. 4, pp.499-504 crossref(new window)
폴리머 콘크리트를 적용한 하수암거의 공학적 특성,권성준;민병윤;박상순;

한국구조물진단유지관리공학회 논문집, 2012. vol.16. 6, pp.9-17 crossref(new window)
M. Saroja Devi, V. Murugesan, K Rengarai, and P. Anand, 'Utilization of Flvash as Filler for Unsaturated Polyester Resin', Journal of Applied Polymer Science, Vol.69, 1998, pp.1385-1391 crossref(new window)

Mostafa Taavakoli and Parviz Soroushian, 'Strengths of Recycled Aggregate Concrete Made Using Field Demolished Concrete as Aggregate', ACI Materials Journal, Title No. 93-M21, 1996, pp.182-190

Rasheeduzzafar, Asfabanullah Khan, 'Recycled Concrete-A Source for New Aggregate', the American Society for Testing and Materials, Vol.6, 1984, pp.17-27

Torven C. Hansen, 'Recycled aggregates and recycled aggregate concrete second state-of-the-art report developments 1948-1985', Materiaux et constructions, Materials and structures, No.111, 1986, pp.201-246

Jose M. V. Gomez-Soberon, 'Porosity of recycled concrete with substitution of recycled concrete aggregate An experimental study', Cement and Concrete Research, Vol.32, 2002, pp.1301-1311 crossref(new window)

Lech Czarnecki, Andrzej Garbacz, and Joanna Kurach, 'On the characterization of polymer concrete fracture surface', Cement and Concrete Composites, Vol.23, 2001, pp.399-409 crossref(new window)

Bong-Hak Lee and Jin-Young Kim, 'lmproving Performance of Recycled Waste Concrete', Journal of Korea Concrete Institute, Vol.7, No.2, 1995, pp.136-145