JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Evaluation of Shear Design Provisions for Reinforced Concrete Beams and Prestressed Concrete Beams
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Evaluation of Shear Design Provisions for Reinforced Concrete Beams and Prestressed Concrete Beams
Kim Kang-Su; Kim Sang-Sik;
  PDF(new window)
 Abstract
Shear test data have been extracted from previous experimental research and compiled into a database that may be the largest ever made. In this paper, the shear database (SDB) was used for evaluating shear design provisions for both reinforced concrete (RC) beams and prestressd concrete (PSC) beams. A discussion on the use of the results of this evaluation related to calibration and strength reduction factor for the shear design provisions was also provided. It was observed that the shear design provisions did not provide good predictions for RC members and gave very poor predictions especially for RC members without shear reinforcement. On the other hand, the limit on shear strength contributed by transverse reinforcement was observed to be lower than necessary. The shear design provisions gave very unconservative results for the large RC members (d>700mm) without shear reinforcement having light amount of longitudinal reinforcement $(\rho_w<1.0\%)$. However, for PSC members the shear design provisions gave a good estimation of ultimate shear strength with a reasonable margin of safety. Despite of a large difference of accuracy in prediction of shear strength for RC members and PSC members, the shear design provisions used a same shear strength reduction factor for these members. As a result, the shear design provisions did not provide a uniform factor of safety against shear failure for different types of members.
 Keywords
shear strength;shear design;reinforced concrete beam;prestressed concrete beam;strength reduction factor;
 Language
Korean
 Cited by
1.
Revision on Material Strength of Steel Fiber-Reinforced Concrete,;;;;;

International Journal of Concrete Structures and Materials, 2011. vol.5. 2, pp.87-96 crossref(new window)
1.
Revision on Material Strength of Steel Fiber-Reinforced Concrete, International Journal of Concrete Structures and Materials, 2011, 5, 2, 87  crossref(new windwow)
 References
1.
ACI Committee 318, 'Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318 R-02)', American Concrete Institute, Farmington Hills, 2002, 443pp

2.
Kani, G. N. J., 'Basic Facts Concerning Shear Failure', ACI Journal, Proceedings Vol.63, No.6, June 1966, pp.675-692

3.
Collins, M P. and Kuchma, D. A, 'How Safe Are Our Large, Lightly Reinforced Concrete Beams, Slabs, and Footings?' ACI Structural Journal, Vol. 96, No.4, Jul.-Aug. 1999, pp.482-490

4.
Angelakos, D., Bentz, E. C, and Collins, M. P, 'The Effect of Concrete Strength and Minimum Stirrups on the Shear Strength of Large Members', ACI Structural Journal, Vol.98, No.3, 2001, pp. 200-300

5.
Reineck, K. H, Kuchma, D. A., and Kim, K. S., Marx, S., 'Shear Database for Reinforced Concrete Members without Shear Reinforcement', ACI Structural Journal, Vol.100, No.2, Mar.-Apr., 2003, pp.240-249

6.
K. S. Kim, 'Shear Behavior of Reinforced Concrete Beams and Prestressed Concrete Beams', Ph.D. Dissertation, Dept, of Civil and Environmental Engineering, University of Illinois at UrbanaChampaign, 2004, 475pp

7.
한국콘크리트학회, 콘크리트구조설계기준. 해설, 한국콘크리트학회, 2000. 9, 413pp

8.
Nawy, E. G., Prestressed Concrete: A Fundamental Approach, Prentice Hall, Upper Saddle River, New Jersey, 3rd ed, 1999, 938pp

9.
ACI Committee 318, 'Commentary on Building Code Requirements for Reinforced Concrete (ACI 318-63)', SP-10, American Concrete Institute, Detroit, 1935, pp.78-84

10.
Sozen, M. A, Zwoyer, E. M, and Siess, C. P., Strength in Shear of Beams without Web Reinforcement, Urbana, Illinios Bulletin No. 452, Engineering Experiment Station, University of Illinois, April 1959

11.
Kuchma, D. A. and Kim, K. S., 'Stress Limits and Minimum Reinforcement Requirements in Shear Design Provisions', Progress in Structural Engineering and Materials, Vol.3, No.4, 2001, pp.317-325 crossref(new window)

12.
Moody, K. G,, Viest, I. M,, Elstner, R. C., and Hognestad, E., 'Shear Strength of Reinforced Concrete Beams, Part-1: Tests of Simple Beams', Journal of the American Concrete Institute, Vol.51 , No.4, 1954, pp.317 -333

13.
Yoon, Y. S., Cook, W. D., and Mitchell, D., 'Minimum Shear Reinforcement in Normal, Medium, and High-Strength Concrete Beams', ACI Structural Journal, Vol.95, No.5, 1996, pp.576-584

14.
Collins, M. P. and Kuchma, D., 'How Safe Are Our Large, Lightly Reinforced Concrete Beams, Slabs, and Footings?' ACI Structural Journal, Vol.96, No. 4, 1999, pp.482-490

15.
Angelakos, D,, Bentz, E. C., and Collins, M. P., 'The Effect of Concrete Strength and Minimum Stirrups on the Shear Strength of Large Members', ACI Structural Journal, Vol.98, No.3, 2001, pp.290-300

16.
Kani, G. N. J, 'How Safe Are Our Large Reinforced Concrete Beams', ACI Journal Proceedings, Vol.64, Mar. 1967, pp.128-141

17.
Bazant, Z. P. and Kim, J. K, 'Size Effect in Shear Failure of Longitudinally Reinforced Beams', ACI Structural Journal, Vol.81, No.5, Sen.-Oct, 1984, pp. 456-468

18.
Bazant, Z. P. and Sun, H. H., 'Size Effect in Diagonal Shear Failure: Influence of Aggregate Size and Stirrups', ACI Structural Journal, Vol.84, No.4, 1987, pp.259-272

19.
Shioya, T., Shear Properties of large reinforced concrete member, Special Report of Institute of Technology, Shimizu Corporation, No.25, 1989, 198pp

20.
Elstner, R.C. and Hognestad, E., 'Laboratory Inverstigation of Rigid Frame Failure', ACI Journal, Jan. 1957, pp.637-668

21.
Collins, M. P. and Kuchma, D. A, 'Advances in Understanding Shear Performance of Concrete Structures', Progress in Structural Engineering and Materials, Vol.1, No.4, 1998, pp.1-10 crossref(new window)

22.
JSCE, Specification for Design and Construction of Concrete Structures: Design, JSCE Standard, Part 1, Japan Society of Civil Engineers, Tokyo, 1986

23.
AASHTO, AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, 2nd ed, Washington, DC, 1998, 1116pp. Including interim revisions for 1999 through 2003

24.
MacGregor, J. G., Reinforced Concrete: Mechanics and Design, Prentice Hall, Englewood Cliffs, New Jersey, 3rd ed, 1997, 939pp

25.
AASHTO, Standard Specifications for Highwqy Bridges, American Association of State Highway and Transportation Officials, Washington, DC, 2002, 722pp