JOURNAL BROWSE
Search
Advanced SearchSearch Tips
The Influence of Fineness Modulus of Pine Aggregate and Grain Shape of Coarse Aggregate on the Properties of High Flowing Concrete
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The Influence of Fineness Modulus of Pine Aggregate and Grain Shape of Coarse Aggregate on the Properties of High Flowing Concrete
Jung Yong-Wook; Lee Seung-han; Yun Yong-Ho;
  PDF(new window)
 Abstract
This study is to examine the influence of defective grain shape of coarse aggregate and lowered fineness modulus of fine aggregate on the characteristics of high flowing concrete. The flow ability and compact ability of high flowing concrete was examined using fine aggregate, varying its fineness modulus to 2.0, 2.5, 3.0, and 3.5, and coarse aggregate with before and after grain shape improvement. Also the influence of fineness modulus of fine aggregate and grain shape of coarse aggregate on dispersion distance of particles of aggregate was examined by relatively comparing the dispersion distance between particles of aggregate. According to the experimental result, minimum porosity when mixing fine aggregate and coarse aggregate was shown in order of fineness modulus of fine aggregate, 3.0, 2.5, 2.0, 3.5, regardless of the improvement of grain shape. So when the fineness modulus is bigger or smaller than KS Standard , the porosity increased. When the spherical rate of the grain shape of coarse aggregate unproved from 0.69, a disk shape to 0.78 sphere shape, the rate of fine aggregate, which represents minimum porosity, decreased from . The 28 days compressive strength according to fineness modulus of fine aggregate increased about 3 ma as the fineness modulus increased from 2.0 to 2,5, and 3.0. However, the 28 days compressive strength decreased about 9 ma at 3.5 fineness modulus as compared with 3.0 fineness modulus. The improvement of grain shape in coarse aggregate and increase of fineness modulus in fine aggregate made the flow ability, compact ability, and V-rod flowing time improve. Also the fineness modulus of fine aggregate increased the paste volume ratio when a higher value was used within the scope of KS Standard .
 Keywords
high flowing concrete;grading;fineness modulus;grain shape;paste volume rate;
 Language
Korean
 Cited by
1.
콘크리트용 잔골재 혼합을 위한 Driscoll 방법의 적용,이성행;함형길;김태완;오용주;

한국구조물진단유지관리공학회 논문집, 2011. vol.15. 3, pp.178-185 crossref(new window)
2.
대경권 셰일 골재의 물성 평가 및 치환율 변화에 따른 콘크리트의 특성,이승한;정용욱;여인동;최종오;배수호;

한국산학기술학회논문지, 2012. vol.13. 11, pp.5551-5557 crossref(new window)
3.
제주 해안지역 모래의 광물성분에 기인한 공학적 특성 및 잔골재 활용방안 연구,김승현;이동욱;

한국지반신소재학회논문집, 2014. vol.13. 4, pp.57-68 crossref(new window)
4.
부순모래의 조립률 및 치환률에 따른 콘크리트의 기초 특성,윤용호;최종오;이동규;정용욱;

한국건설순환자원학회논문집, 2015. vol.3. 3, pp.244-251 crossref(new window)
1.
Fundamental Characteristics of Concrete According to Fineness Modulus and Replacement Ratio of Crushed Sand, Journal of the Korean Recycled Construction Resources Institute, 2015, 3, 3, 244  crossref(new windwow)
2.
Physical Properties of Shale Aggregate and Characteristics of Concrete in Replacement Ratio in Daegu-Kyeongbuk Region, Journal of the Korea Academia-Industrial cooperation Society, 2012, 13, 11, 5551  crossref(new windwow)
3.
A Study on Utility for Fine Aggregates and Engineering Characteristics by Mineralogical Composition of Sands on the Coast of Jeju Island, Journal of the Korean Geosynthetic Society, 2014, 13, 4, 57  crossref(new windwow)
 References
1.
정용욱, 윤용호, 이승한, '현장적용을 위한 분체계 초유동콘크리트의 배합비 산정에 관한 연구', 대한토목학회 정기학술대회, 2003. 10, pp.1113-1118

2.
오병환, '내구성 향상을 위한 고성능콘크리트의 개발과 활용', 콘크리트학회지, 6권 1호, 1997, pp.4-51

3.
岡村甫, 前川宏一, 小津一雅, 'ハイパフォーマンスコン クリード', 技報堂出版, 1993, pp.60-85

4.
松岡康司II, '超流動コンクリート',コンクリート工早論文集, Vol.31, No.3, 1993, pp.79-82

5.
万木正弘, 坂田 昇, 岩井 稔, '特殊増粘聞を用いた締固 め不要コンクリートに闘する研究', コンクリト工早年 次論文報告集, Vol.14, No.1, 1992, pp.51-56

6.
Lee, Seung-Han, Han, and Hyung-Sub, 'Effect of Powder and Aggregate on CoMpactability of High Performance Concrete', An International Journal of Korea Concrete Institute, Vol.11, No.3, Jul. 1999, pp.19-28

7.
이승한, 김희중, 정용욱, '굵은골재 입형개선이 고성능 콘크리트의 충전특성에 미치는 영향', 콘크리트학회논문집, 12권 4호, 2000, pp.10-111

8.
卒田隆群, 竹田宣典, 三浦律彦, 十河茂幸, 超研晶コン クリートのフレッシュ性肢に及ほす骨材粒度の影響', コンクリート工早年次論文報告集, Vol.17, No.1, 1995, pp.81-86

9.
出光 隆, 山崎竹専, 高山俊一, '球賦細骨材を用いた超 流動化コンクリートの配合に閲する研究', コンクリート 工學年次論文報告集, Vol.14, No.1, 1992, pp.393-398

10.
Cetin, A. and Carrasquillo, R L., 'High-Performance Concrete: Influence of Coarse Aggregates on . Mechanical Properties', ACI Materials journal, Vol.95, No.3, 1998, pp.252-261

11.
村田二郎, 岩崎訓明, 見玉和巳, 'コンクリートの科學と 技術', 山海堂, 1996, pp.41-94

12.
近松龍一, 竹田宣典, 十河茂幸, '超流動コンクリートの 流動性と分離抵抗性に闘する一考案, コンクリト工學年次論文報告集, VoL. 14, No. 1, 1992, pp.381-386

13.
本間札人, 山本康弘, '高流動コンクリートの流動性評債 方法に閲する研究', コンクリート工學 年次論文報告集, Vol.13, No.1, 1996, pp.75-80

14.
皆口正一, 丸山久一, 稲葉美穂子, 坂田昇, '高折晶コン クリートの材料分離則定方法に閲する研究' コンクリ ト工學 年次論文報告集, Vol.13, No.1, 1996, pp.87-92

15.
岩井信彰干, 榔田佳寛, 阿部道彦, '高流動コンクリト のフレッシュ性肢に及ぽす骨材の形状.寸法]の影響', コンクリ一工學 年次論文報告集, Vol.13, No.1, 1996, pp.117-122

16.
Larrard, F. D. and Belloc, A, 'The Influence of Aggregate on the Compressive Strength of Normal and High-Strength Concrete', ACI Materials Journal, Vol.94, No.3, No.1,1997, pp.417-426

17.
出光隆, 山崎制導, 高山俊一, '球状細骨材を用いた超 流動化コンクリトの配合に闘する研究', コンクリート 工學年次論文報告集, Vol.14, No.1, 1992, pp.393-398