Advanced SearchSearch Tips
Experimental Test for Seismic Performance of PCS Structural System
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Experimental Test for Seismic Performance of PCS Structural System
Park, Soon-Kyu; Yeo, In-Seok;
  PDF(new window)
The PCS system, which consists of precast concrete column and steel beam, is a kind of composite structural systems. In this paper, experimental study has been conducted to analyze seismic performance of bolted beam-to-column connections for the PCS system. Based on experimental results from the seismic testing of eight interior PCS specimens, it shows that behavior of PCS system is satisfactory to seismic performance criteria of ACI such as strength deterioration, stiffness degradation and energy dissipation capacity except initial stiffness. All of the specimens maintain their strength at large levels of story drift without significant loss of stiffness and show high ductility level for inelastic behavior. The energy dissipation capacity is two times greater than requirement of ACI criterion. But the initial stiffness of all specimens does not satisfy ACI criterion, and this phenomenon is similar to the other composite structural systems such as RCS, CFT system.
PCS;seismic performance;bolted beam-to-column connection;composite structure;
 Cited by
관통형 연결재로 연결된 PC 보-기둥 맞댐 접합의 내진성능에 관한 실험적 연구,박순규;김민희;

한국콘크리트학회논문집, 2010. vol.22. 4, pp.441-450 crossref(new window)
지하차도 구조물의 우각부 연결장치에 대한 실험적 평가,김성배;김장호;김태균;

대한토목학회논문집, 2013. vol.33. 1, pp.23-34 crossref(new window)
박순규, '합성 구조의 접합부 개발 현황 및 전망', 콘크리트학회지, 17권 2호, 2005, pp.22-27

최병정, 이은택, '지진에 의한 접합부 파괴 유형', 한국강구조학회지, 14권 4호, 2002, pp .16-21

ACI 352R-91, 'Recommendations for Design ofBeam Column Joint in Monolithic Reinforced Concrete Structures', ACI Manual of Concrete Practice, ACI, 2002, pp.1-9

ACI T1.1R-01, 'Commentary on Acceptance Criteria for Moment Frames Based on Structural Testing', ACI Manual of Concrete Practice, ACI, 2002, pp.1-7

전진우, CFT 기둥과 H형 강보 관통형 볼트 접합부의 내 진성능에 관한 실험적 연구, 울산대학교 석사학위 논문, 2001, pp.14-19

L.Y. Wu, L. L. Chung, S. F. Tsai, C. F. Lu, and G L. Hwang, 'Seismic Behavior of Bidirectional Bolted Connections for CFT Column and H-Beams', Engineering Structure, Vol.29, 2007, pp.395-407 crossref(new window)

A. Elremaily and Ai Azizinamini, 'Experimental Behavior of Steel Beam to CFT Colunm Connections', Journal of Constructional Steel Research, Vol.57, 2001, pp.1109-1111

Gustavo Parra-Montesions and Jame K. Wight, 'Seismic Response of Exterior RC Column to Steel Beam Connection', Journal of Structural Engineering, ASCE, 2000, 1117pp

Hiroshi Kuramoto and Isao NishiYama, 'Seismic Performance and Stress Transferring Mechanism of Through-Column- Type Joints for Composite Reinforced Concrete and Frames', Journal of Structural Engineering, ASCE, 2004, 355pp

G. J. parra-Montesinos, X. Liang, and J. K. Wight, 'Towards Deformation-Based Capacity Design of RCS Beam-Column Connections', Engineering Structure, Vol.25,2003, pp.688-689

최근도, 유영찬, 이리형, '철근콘크리트 기둥 및 철골보로 구성된 복합구조의 접합부 거동에 관한 실험적 연구', 콘크리트학회 논문집, 15권 2호, 2003, 300pp

James O. Jirsa, Design of Beam-column Joints for Seismic Resistance, ACI, 1991, pp.208-218

Minehiro Nishiyama, Seismic Response and Seismic Design of Prestressed Concrete Building Structures, Department of Architectural Engineering, Kyoto University, 1993, pp.13-135

F. M. Mazzolani, Moment Resistant Connections of Steel Frames in Seismic Areas, E&FN SPON, New York, 2000. pp.224-242

Egor P. Popov and Shakhzod M. Takhirov, 'Bolted Large Seismic Steel Beam to Column Connections Part I: Experimental Study', Engineering Structure, Vol.24, 2002, pp.1529-1532