JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A study on the usage satisfaction of multi-type handpieces with equipped air-jet function
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A study on the usage satisfaction of multi-type handpieces with equipped air-jet function
Kim, Im-Sun; Choi, Byung-Hwan;
  PDF(new window)
 Abstract
Purpose: This study was to investigate usage satisfaction of multi type handpiece with equipped air-jet function Methods: The subjects of this study through the survey was conducted for fifty-nine dental technicians in Daegu and Gyeongsangbukdo from the May 7 to 19, after the June 23 to July 4 2014. The survey was about the function and quality through user testing environment by cutting zirconia specimens using appliance for zirconia. The collected date was analyzed by the statistical program SPSS Win Ver 19.0 for the satisfaction of handpiece and control system. To test for significance on each item, p<0.05 had been decided a standard. General characteristics and relationship between the handpiece and control system was performed correlation analysis. Results: The results of this study is as follows. 35 dental technicians had 1~2 years career in zirconia part as the highest 59.3%, 95% of subjects expected that the prospects for the zirconia material have bright prospects. The satisfaction of multi type handpiece and control system design and function showed a significant difference. Subjects satisfied with the design and function of the multi type showed negative correlation with those of Standard. The satisfaction of multi type handpiece showed 3.37 points of air jet, 3.05 points of noise level, 2.69 points of water flow rate, and 1.98 points of cruise function. Sample differences in all parameters showed a statistically higher difference. Conclusion: High-speed cutting mechanism of multi-type is recommended working with zirconia materials and the multi-type unit combined handpiece motor, air-turbine and air-gun will be expected the increase of user due to the high satisfaction of air jet.
 Keywords
Air-jet;motor handpiece;high-speed handpiece;control unit;zirconia;
 Language
Korean
 Cited by
 References
1.
Bae TS. Properties of Dental CAD/CAM Zirconia. korean Dental Association, 49(5), 260-264, 2011.

2.
Baek JY, Kim BH, Jung SY, Park TS. Analysis of the Machining Condition for Zirconia Prosthesis. Koera Society for Precision Engineering 08S204, 411-412, 2008.

3.
Dyson JE, Darvell BW. He development of the dental high speed air turbine-part 1. Australian Dental Journal, 38, 1, 49-58, 1993. crossref(new window)

4.
Dyson JE, Darvell BW. Low and free running speed characterization of dental air turbine handpieces. Journal of Dentistry, 27, 7, 456-477, 1999.

5.
Iseri U, Ozkurt Z, Yalniz A, Kazazoglu E. Comparison of different grinding procedures on the flexural strength of zirconia. J Prosthet Dent, 107, 309-315, 2012. crossref(new window)

6.
Kim JY, Min SN, Lee MH, Lee JH. Design of Hand-piece by the adaptation of the usercentered design. Ergonomics society of korea, 159-162, 2010.

7.
Lee HH. A clinical consideration of current dental zirconia CAD/CAM restoration. korean Dental Association, 49(5), 279-284, 2011.

8.
Lee JH, Lee SJ, Lee JY, Kih SH, Lee JM, Jung JP. Properties of the machinability of dental zirconia using a handpiece and the zirconia brazing. The Korean Wellding Joining Society Spring, pp176-176, 2013.

9.
Lee JY. The Effects of Surface Grinding and Polishing on the Transformation and Flexural Strength of Zirconia. Graduate School of Chosun University, 2014.