Publisher : The Korean Society of Propulsion Engineers
DOI : 10.6108/KSPE.2016.20.1.043
Title & Authors
Combustion Characteristics of the Atomized Hydrocarbon Liquid-fuel Spray Injected through a Slit-jet Nozzle Kim, Min Sung; Kim, Jeong Soo;
An experimental study was performed to investigate the combustion characteristics of the liquid hydrocarbon fuel atomized by an ultrasonic oscillator. Configuration of the flame was caught by the DSLR camera, and images were analyzed in detail through a post-processing. Temperature of the flame zone was measured using thermocouple. It is resulted that the flame area is proportional to the mass flow rate of carrier gas as well as the voltage applied to the ultrasonic oscillator. Temperature of the flame zone is measured and analyzed according to variation in the operating condition of the burner, too.
Ju, E.S., La, W.J. and Choi, W.C., "A Study on Characteristics of the Liquid Atomization by Ultrasonic," Trans. Korea Soc. Auto. Eng., Vol. 7, No. 5, pp. 31-39, 1999.
Wood, R.W. and Loomis, A.L., "The Physical and Biological Effects of High-frequency Sound-Waves of Great Intensity," Philosophical Magazine, Vol. 4, Issue 22, pp. 417-436, 1927.
Lang, R.J., "Ultrasonic Atomization of Liquid," The Jounal of the Acoustical Society of America, Vol. 34, No. 1, pp. 6-8, 1962.
Takuya, F., Yasuki, H., Noriyuki, K., Masanobu, H. and Yoshio, T., "Characteristics of Low Vapor Pressure Oil Ignition Developed With Irradiation of Mega Hertz Level Ultrasonic," Fuel, Vol. 83, Issue 16, pp. 2205-2215, 2004.
Topp, M.N. and Eisenklam, P., "Industrial and Medical Uses of Ultrasonic Atomizers," Ultrasonic, Vol. 10, Issue 3, pp. 127-133, 1972.
Hwang, S.H., "Distribution Chanracteristics of Fuel Drop Size and Flame Temperature with Different Bluff Body Shpes," Master's Thesis, Pusan National University, Department of Mechanical Engineering Graduate School, 2001.
Kim, J.Y., Kim, Y.S. and Song, Y.H., "A Study on the Comparison between an Optical Fiber and a Thermal Sensor Cable for Temperature Monitoring," Korean Society Geotechnical Engineering, Vol. 23, No. 4, pp. 15-24, 2007.