JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A Study on Compressive Strength and Microstructure Properity of Reactive Powder Concrete Containing Copper Slag as Aggregate
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on Compressive Strength and Microstructure Properity of Reactive Powder Concrete Containing Copper Slag as Aggregate
Kim, Young Su; Lee, Yong Mu;
 
 Abstract
Thesedays, ultra high strength concrete that exceeds compressive strength of 100MPa is used widely in modern structure. Reactive powder concrete is an ultra high strength cement-based material. In this study, copper slag has been replaced with quartz sand at 10, 20, 30, 40and 50 %. Three different curing methods(water, steam and autoclave curing) were applied to the specimens. After mixing, tests of mini slump flow, unit volume weight and amount of air were conducted on fresh reactive powder concrete. Compressive strength was determined after 28days on the hardened reactive powder concrete specimens. Test results of compressive strength of reactive powder concrete containing copper slag was over 200MPa after autoclave curing.
 Keywords
Reactive Powder Concrete;Copper Slag;Compressive Strength;Microstructure;Curing Condition;
 Language
Korean
 Cited by
 References
1.
Bobrowsky, A., Gouda, G.R., & Roy, D.M. (1972). Very high strength cement pastes prepared by hot pressing and other high pressure techniques, Cement and Concrete Research, (2)3, 349-366. crossref(new window)

2.
Cheyrezy, M H., & Richard, P. (1994). Reactive powder concretes with high ductility and 200-800 MPa compressive strength, ACI Spring Convention, San francisco, SP.124-144, 507-517.

3.
Cheyrezy, M H., & Richard, P. (1995). Composition of reactive powder concrete, Cement and Concrete Research, (25)7, 1501-1511. crossref(new window)

4.
Jaung, J. (2000). Concrete materials engineering, Bo Sung Gak Press, 87-89.

5.
Ji, S. (2000). Study on the properties of concrete with copper smelting slag, Architectural Institute of Korea, (16)12, 111-118.

6.
Jo, B. (2005). Investigation on the characteristics of cement mortar with nano-$SiO_{2}$ particles, KSCE Journal of Civil Engineering, (25) 2A, 301-305.

7.
Kho, K. (2007). Effect of the compressive strength of ultra-high strength steel fiber reinforced cementitious composites on curing method, KSCE Journal of Civil Engineering, (27) 3A, 427-432.

8.
Korea Concrete Institute, (2004). Advanced concrete engineering for special uses, Ki Moon Dang Press, 31.

9.
Korean Standards Association KS F 2543, (2000). Copper slag aggregate for concrete.

10.
Lee, et al. (2003). A fundamental study of ferro copper slag for concrete aggregate, Journal of the Korea Concrete Institute, (15)1, 35-42. crossref(new window)

11.
Lu, P., & Young, J.F. (1992). Hot pressed DSP cement paste, Material Research Society Symposium Proceedings, (245), 321-328.

12.
Park, C. (2000). The strength properties of mortar with the copper smelting slag, M.A. Thesis, Kon-Kuk University, 260.

13.
Park, K. (2012). Mechanical properties of ultra high strength concrete using ternary blended cement, Journal of the Korea Institute for Structural Maintenance and Inspection, (16)6, 056-062. crossref(new window)

14.
Seo, C. (2001). Study on the flowing characteristic of concrete with copper smelting slag, Proceeding of Symposium on Korea Concrete Institute, 319-324.