Advanced SearchSearch Tips
Experimental Study on Flexural Capacity of I-slab System using Slim Precast Slab Deck
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Experimental Study on Flexural Capacity of I-slab System using Slim Precast Slab Deck
Kim, Seung-Hun; Lee, Han-Seung; Choi, Hyun-Ki;
Recently, the interest in precast voided slab system for buildings is growing up according to the demand for high quality control and the increase in slab thickness. A hollow slab system is widely known as one of the effective slab system which can reduce self-weight of slab. However, in case of conventional precast voided slabs, It is uncertain to apply these slab system to two-way slabs because It have a rectangular shaped void-former. In this study, I-slab system that applies plate type and octagonal pillar type void-former on slim precast slab deck is developed, and then flexural capacity of the I-slab system Is evaluated by 4-pointed banding test. In addition, flexural capacities of I-slab system along the longitudinal and transverse axis are compared to verify the applicability of I-slab system to two-way slabs. Test results showed that I-slab had enough flexural strength and ductility for slab member. In addition, I-slab system Is found to be sufficiently possible to apply on two-way slabs.
I-Slab System;Hollow Slab;Flexural Stiffness;Flexural Strength;Precast Concrete;
 Cited by
ACI Committee 318 (2011). Building Code Requirements for Structural Concrete and Commentary. ACI 318-11, American Concrete Institute, Farmington Hills, 128-138.

BubbleDeck Technology (2008). BubbleDeck Voided Flat Slab Solutions-Technical Manual & Documents, BubbleDeck, UK. 1-25.

Chung, J., Choi, H., Lee, S., Oh, J., & Choi, C. (2009). An Analytical Study of the impact of Hollow Sphere on Biaxial Hollow slab. Journal of AIK, 29(1), 475-478.

Chung, J., Choi, H., Lee, S., & Choi, C. (2011). An Analytical Study on the Optimal Hollow Sphere Shapes In a Biaxial Hollow Slab. Journal of AIK, 27(7), 3-10.

Chung, J., Kang, S., Choi, C., Lee, S., & Choi, H. (2013). An Experimental study for Bond Characteristics of Deformed Bar Embedded In Donut type Biaxial Hollow Slab. Journal of KCI, 25(2), 155-163.

KCI (2012). Building Code Requirements for Reinforced Concrete. KCI-2012. Korean Concrete Institute, 175.

Kim, S., Jang, T., & Kim, S. (2009). Structural Performance Tests of Two-way Void Slabs. Journal of AIK, 25(8), 35-42.

Kim, S., Hwang, H., Hwang, H., Lee, K., Lee, D., & Lee, J. (2009). Experimental Study on the Flexural Capacity of Biaxial Hollow Reinforced Concrete Half Slabs. Journal of AIK, 25(8), 11-18.

Lee, W., Cho, S., Lee, S., Cho, S., & Chung, L. (2009). Flexural Strength and Stiffness of Hollow-core Slabs. Journal of AIK, 25(1), 49-56.