Publisher : The Korean Society of Mechanical Engineers
DOI : 10.22634/KSME-A.1922.214.171.1244
Title & Authors
Stress Analysis of Fir-Tree Root in Turbine Rotor Using Photoelastic Technique Sin, Gwang-Bok; Gyeong, U-Min; Hong, Chang-Seon;
The disk/blade assembly of a turbine engine is made in the shape of a dovetail type or a fir-tree type. Since disk fillet regions or contact surfaces undergo high stress comcentration, fatigue cracks frequentrly occur in the disk/blade assembly. Therefore, it is necessary to analyze the stress distributions in the fir-tree type disk/balde assembly and predict the region of fatigue failure. The stress distributions of the disk/blade assembly were investigated by using the photoelastic method and the finite element method. Two dimensional photoelastic techniques were used to investigate the stress distributions of contact surfaces and fillet regions. TH stress distributions were obtained by the shear-difference method and were compared to the finite element results. It was found that maximum tensile stresses were higher in the fillet region thatn in the contact surfaces of the fir-tree models. The finite element results showed good agreement with the experimental results.
Shear-Difference method;Photoelasticity;Isochromatics;Isoclinics;Nonlinear Contact Problem;Fir-Tree Type Root;Polariscope;