JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Vibration Characteristics of a New Optical Disk with Initial Stress
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Vibration Characteristics of a New Optical Disk with Initial Stress
Kim, Jae-Gwan; Lee, Seung-Yeop;
  PDF(new window)
 Abstract
Free vibration characteristics of an initially stressed CD/DVD disk, which is designed for increasing critical speeds of current optical disks, are analyzed using the Rayleigh-Ritz technique based on variational formulations. Natural frequencies of the new disk depend on membrane stresses caused by disk rotation as well as residual stresses imposed during the cooling process of the injection molding. Critical speeds are calculated for the various initial patterns of radial and circumferential stresses. Initially imposed tensile stresses increase the natural frequencies of all the vibration modes except zero nodal diameter mode, whose natural frequency is independent of circumferential stress. A new disk with initial tensile stress of 0.5MPa is shown to have its critical speed about 30 % higher than the current optical disk.
 Keywords
Free Vibration;Rotating Disk;Optical Disk;Initial Stress;Critical Speed;CD-ROM;
 Language
Korean
 Cited by
1.
공기 유동 효과를 고려한 회전 디스크의 진동 특성 (I) - 이론적 해석 -,이승엽;임효석;

대한기계학회논문집A, 2008. vol.32. 2, pp.127-134 crossref(new window)
 References
1.
Lee, S-Y. and Kim, S., 1998, 'Mechanical Issue in Optical Disk Drives,' the 9th Symposium on information Storage and Processing Systems, IMECE, ISPS-Vol. 4, pp. 81-90

2.
이승엽, 1999, '정보저장기기의 회전 디스크 임계속도에 관한 연구,' 한국소음진동공학회 1999년도 춘계학술대회 논문집, pp. 185-191

3.
AcAllister, J., 1997, 'Characterization of Disk Vibrations on Aluminum and Alternative Substrates,' IEEE transactions on Magnetics, Vol. 33, No. 1, pp. 968-973 crossref(new window)

4.
Park, S. J., Kim, S. K. and Lee, C. Y., 1999, 'Vibration characteristics and birefringence of optical disk considering initial stress,' SPIE(Optimechnical Engineering and Vibration Control), Vol. 3786, pp. 106-115 crossref(new window)

5.
Mote, C. D., 1965, 'Free Vibration of Initially Stressed Circular Disks,' ASME Journal of Engineering for Industry, Vol. 87, pp. 285-264

6.
Mote, C. D. and Szymani, R., 1978, 'Circular Saw Vibration Research,' The Shock and Vibration Digest, Vol. 10, pp. 15-30 crossref(new window)

7.
Dugdale, D. S., 1966, 'Theory of Circular Saw Tensioning,' international Journal of Production Research, Vol. 4, pp. 237-248 crossref(new window)

8.
Parker, R. G. and Moet, C. D., 1991, 'Tuning of the Natural frequency Spectrum of a Circular Plate by in Plane Stress,' Journal of Sound and Vibration, vol. 145, No. 1, pp. 95-110 crossref(new window)

9.
Renshaw, A. A., 1998, 'Increasing the Maximum Stable Rotation Speed of a Circular disk Using Speed dependent Clamping,' Journal of Sound and Vibration, vol. 210, No 4, pp. 431-439 crossref(new window)

10.
Park, G., Song, I., Kim, S. and Lee, S. Y., 2000, 'Airflow and Sound Induced by Disk Rotation in DVD-ROM drives, Part I : Effect of Design Parameters,' Journal of Information Storage and Processing System, Vol. 2, No. 1, pp. 3-11

11.
Renshaw, A. A., 1998, Critical Speed for Floppy Disks, ASME Journal of Applied Mechanics, Vol. 65, pp. 116-120

12.
Lamb, H. and Southwell, R. V., 1921, 'The vibration of a Spinning Disk,' Proceeding of the Royal Society, Vol. 99, pp. 272-280 crossref(new window)

13.
Eversman ,W. and Dodson, R. O., 1969, 'Free Vibration of a Centrally Clamped Spinning Circular Disk,' AIAA Journal, Vol. 7, No. 10, pp. 2010-2012

14.
Chung, J. T., Kang, N. C. and Lee, J. M., 1966, 'A Study on Free Vibration of a Spinning Disk,' KSME International Journal, vol. 10, No. 2, pp. 138-145

15.
Renshaw, A. A. and Mote, C. D., 1993, 'Absence of one nodal diameter critical speed modes in an axisymmetric rotating disk,' ASME Journal of Applied Mechanics, Vol. 59, pp. 687-688