Advanced SearchSearch Tips
Numerical Modeling of the Transformation Temperature Effect on the Relaxation of Welding Residual Stress
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Numerical Modeling of the Transformation Temperature Effect on the Relaxation of Welding Residual Stress
Jang, Gyoung-Bok; Kang, Sung-Soo;
  PDF(new window)
Most of ferrous b.c.c weld materials have martensitic transformation during rapid cooling after welding. It is well known that volume expansion due to the phase transformation could influence on the relaxation of welding residual stress. To apply this effect practically, it is necessary to establish a numerical model which is able to estimate the effect of phase transformation on residual stress relaxation quantitatively. For this purpose, the analysis is carried out in two regions, i.e., heating and cooling, because the variation of material properties following a phase transformation in cooling is different in comparison with the case in heating, even at the same temperature. The variation of material properties following phase transformation is considered by the adjustment of specific heat and thermal expansion coefficient, and the distribution of residual stress in analysis is compared with that of experiment by previous study. In this study, simplified numerical procedures considering phase transformation, which based on a commercial finite element package was established through comparing with the experimental data of residual stress distribution by other researcher. To consider the phase transformation effect on residual stress relaxation, the transition of mechanical and thermal property such as thermal expansion coefficient and specific heat capacity was found by try and error method in this analysis. In addition to, since the transformation temperature changes by the kind and control of alloying elements, the steel with many kinds of transformation temperature were selected and the effect of transformation on stress releasement was investigated by the numerical procedures considering phase transformation.
Martensite Transformation;Transformation Expansion;Welding Residual Stress;Residual Stress Relaxation;Specific Heat;Thermal Expansion Coefficient;
 Cited by
Koichi Masubuchi, 1980, 'Analysis of Welded Structures,' Pergamon Press

Koichi Masubuchci, 1991, 'Research Activities Examine Residual Stresses and Distortion in Welded Structures,' AWS. Dec., pp. 41-47

Kunihiko Satoh, Toshio, 1976, 'Effect of Welding Conditions on Residual Stresses Distrivutions in Wedded Structures Materials,' JWS, 45, No. 2, pp. 150-156

Kunihiko Satooh, Toshio, 1976, 'Effect of Transformation Expansion on Welded Residual Stresses Distributions and Welding Deformation,' JWS, 45, No. 7, pp. 560-566

Josefson, B.L., 1983, 'Stress Redistrivution During Annealing ofa Multi-Pass Butt-Welded Pipe,' Journal of Pressure Vessel Technology,105 pp. 165-170

Kalsson, L., 1986, 'Thermal Stresses in Welding,' Thermal Stresses, Ed. R. B. Hetnarski, Vol. 1, pp. 300-389, North-Holland, Amsterdam

Goldak, J., 1990, 'Modeling Thermal Stresses and Distortions in Welds,' Recent Trends in Welding Science and Technology, pp. 71-82. ASM Internal, Material Parks, Ohio

Andersson, B. A. B., 1978, 'Thermal Streses in a Submerged-arc Welded Joint Considering Phase Transformations,' Journal of Engineering Materials and Technology, Vol. 100(No. 4), pp. 356-362

SHIM, Y. L. and FENG, Z. 1992, 'Determination of Residual Stress in Thick-SectionWeldments,' Welding Journal, Vol. 71(No. 9), pp. 305-312

심용래, 이성근, 1993, '용접 잔류응력 해석을 위한 Heat Input Model 개발,' 대한용접학회지, 제11권, 제3호, pp. 110-123

Murata. H. and Kato. N, 1990, 'Proportion of Transformation Superplasticity and Expansdion on Stress Release,' JWS. Vol. 8, No. 2 pp. 249-254

Free, J. A. and Poter Goff. R.F.D., 1989, 'Predicting Residual Stress in Multi-Pass Weldments with the Finite Element Method,' Computer and Structures, Vol. 32(No. 2), pp. 365-372 crossref(new window)

Shim, Y., Feng, Z., Lee, S., Kim, D., Jaeger, J. and Tsai, C.L., 1991, 'Modeling of Welding Residual Streses,' Processings of the Winter Annual Meeting of the ASME, Atlanta, Georgia, pp. 29-41

Leung, C.K. and Pick, R.J., 1990, 'Finite Element Analysis of Multipass Welds,' WRC Bulletin 356, pp. 11-33

Ueda, U., Takahashi, E., Fukuad, K., and Nakacho, K., 1974, 'Transient and Residual Stresses in Multi-Pass Welds,' Transactions of JWRI, Vol. 3(No. 1), pp. 59-67

The Ohio State University, 1992, 'Experimental Verification fo Finite element Modeling Procedure for Thick Plates,' Technical Report Submitted to U.S. Army Corps of Engineers Department of Weding Engineering

Hibbit, H. D. and Marcal, P. V., 1973, 'A Numerical Thermo-Mechanical Model for the welding,' Computer and Structures, Vol. 3(No. 11), pp. 1145-1147 crossref(new window)

Friedman ,E., 1975, 'Thermo-Mechanical Analysis of the Weldig Process Using Finite Element Method,' Journal Press. Vessel Tech. ASME, series J, Vol. 97(No. 3), pp. 206-243

Michaleris, P., and DEbiccari, A. 1997, 'Preduction of Weldijg Diostortion,' Welding Journal Vol. 76(No. 4), pp. 172-179