JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of an Efficient Optimization Technique for Robust Design by Approximating Probability Constratints
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of an Efficient Optimization Technique for Robust Design by Approximating Probability Constratints
Jeong, Do-Hyeon; Lee, Byeong-Chae;
  PDF(new window)
 Abstract
Alternative formulation is presented for robust optimization problems and an efficient computational scheme for reliability estimation is proposed. Both design variables and design parameters considered as random variables about their nominal values. To ensure the robustness of objective performance a new cost function bounding the performance and a new constraint limiting the performance variation are introduced. The constraint variations are regulated by considering the probability of feasibility. Each probability constraint is transformed into a sub-optimization problem and then is resolved with the modified advanced first order second moment(AFOSM) method for computational efficiency. The proposed robust optimization method has advantages that the mean value and the variation of the performance function are controlled simultaneously and the second order sensitivity information is not required even in case of gradient based optimization. The suggested method is examined by solving three examples and the results are compared with those for deterministic case and those available in literature.
 Keywords
Robut Design;Uncertainty;Approximation;
 Language
Korean
 Cited by
1.
공리적 설계를 이용한 비대칭 내부 짐벌을 가진 진동형 자이로스코프의 강건설계,박경진;황광현;이권희;이병렬;조용철;이석한;

대한기계학회논문집A, 2002. vol.26. 5, pp.914-923 crossref(new window)
2.
불확실 변수에 대한 구배 최소화를 이용한 강건 최적 설계와 마이크로 자이로스코프에의 응용,한정삼;곽병만;

대한기계학회논문집A, 2002. vol.26. 9, pp.1931-1942 crossref(new window)
3.
덮개 함수를 이용한 강건 최적설계의 제한 조건 단일화,이정준;정도현;이병채;

대한기계학회논문집A, 2002. vol.26. 8, pp.1719-1726 crossref(new window)
4.
부 최적화 문제의 근사적인 계산을 통한 신뢰도 최적설계 방범의 효율개선,정도현;이병채;

대한기계학회논문집A, 2001. vol.25. 10, pp.1597-1604 crossref(new window)
5.
좌굴을 고려한 적층 복합재 구조의 강건 최적설계에 관한 연구,이병채;이정준;정도현;

대한기계학회논문집A, 2001. vol.25. 9, pp.1483-1492 crossref(new window)
6.
덮개 함수를 이용한 제한 조건 누적 최적화 기법에 관한 연구,이병채;이정준;

대한기계학회논문집A, 2002. vol.26. 4, pp.720-730 crossref(new window)
7.
구배 지수에 근거한 MEMS 구조물의 강건 최적 설계 기법,한정삼;곽병만;

대한기계학회논문집A, 2003. vol.27. 7, pp.1234-1242 crossref(new window)
8.
A Study for Robustness of Objective Function and Constraints in Robust Design Optimization,;

Journal of Mechanical Science and Technology, 2006. vol.20. 10, pp.1662-1669
 References
1.
Phadke, M. S., 1989, Quality Engineering Using Robust Design, Prentice Hall, Englewood Cliffs, New Jersey

2.
한형석, 박태원, 1996, '반응표면 분석법을 이용한 기구의 강건설계,' 한국정밀공학회지, 제 13권, 제 10호, pp. 56-61

3.
이권희, 박경진, 1997, '설계변수의 공차를 고려한 구조물의 강건 최적설계,' 대한기계학회논문집, 제 21권, 제 1호, pp. 112-123

4.
Ramakrishnan, B. and Rao, S. S., 1996, 'A General Loss Function Based Optimization Procedure for Robust Design,' Engineering Optimization, Vol. 25, pp. 255-276 crossref(new window)

5.
Melchers, R. E., 1987, Structural Reliability Analysis and Prediction, Ellis Horwood Limited

6.
Swan, D. A. and Savage, G. J., 1998, 'Continuous Taguchi - A Model Based Approach to Taguchi's 'Quality by Design' with Arbitrary Distributions,' Qualty and Reliability Engineering International, Vol. 14, pp. 29-41 crossref(new window)

7.
Sepulveda, A. E. and Jensen, H., 1996, 'Comparison of Local and Global Approximations for Reliability Estimation,' AIAA, Vol. 34, No. 10, pp. 2162-2170

8.
Grandhi, R. V. and Wang, L., 1998, 'Reliability-Based Structural Optimization Using Improved Two-Point Adaptive Nonlinear Approximations,' Finite Elements in Analysis and Design, Vol. 29, pp. 35-48 crossref(new window)

9.
Rao, S. S., 1996, Engineering Optimization, John Wiley & Sons, New York

10.
정도현, 이병채, 2000, '기계구조의 강건 설계를 위한 최적화 기법의 개발,' 대한기계학회논문집, 제24권, 제1호, pp. 215-224

11.
Liu, P.L. and Kiureghian, A.D., 1991, 'Optimization Algorithms for Structural Reliability,' Structural Safety, Vol. 9, pp. 161-177 crossref(new window)

12.
Kwak, B. M. and Lee, T. W., 1987, 'Sensitivity Analysis for Reliability-Based Optimization Using an AFOSM Method,' Computers & Structures, Vol. 27, pp. 399-406 crossref(new window)