JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Evaluation of Mechanical Property and Fatigue Damage in A Practical Superconducting Cable for Magnet
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Evaluation of Mechanical Property and Fatigue Damage in A Practical Superconducting Cable for Magnet
Sin, Hyeong-Seop; O, Sang-Su;
  PDF(new window)
 Abstract
In order to investigate how the fatigue damage effects on the critical properties of superconductor, a fatigue test at room temperature and an Ic measurement test at 4.2K were carried out in this study, respectively, using a 9 strand Cu-Ni/NbTi/Cu composite cable. Through the fatigue test of a 9 strand Cu-NUNbTi/Cu composite cable, a conventional S-N curve was plotted even though there was a possibility of fretting among strands. It was found that the maximum stress corresponding to the inflection point on the S-N curve obtained was nearly the same value as the yielding strength of cable obtained from the static tensile test. However, the effect of cabling in multi-strands superconducting cable on the fatigue strength was not noticeable. The critical current(Ic) measurement was carried out at 4.2K in a NbTi strand out of the fatigued cable. It showed a degradation of lc at high stress amplitude regions over 380NTa, and the degradation became significant as the applied stress amplitude increased
 Keywords
Superconducting Cable;NbTi Composite Wire;Mechanical Property;S-N Curve;Fatigue Damage;Critical Current;
 Language
Korean
 Cited by
1.
적층판으로 제작된 고온초전도 한류기에 발생한 국부적 열폭주 점에 대한 열응력 해석,양경진;강기주;

대한기계학회논문집A, 2003. vol.27. 5, pp.705-712 crossref(new window)
 References
1.
박종철, 이규원, 홍계원, 이호진, 1996, '초전도 관련 표준의 현황과 대책연구,' 국립기술품질원 보고서

2.
김상현, 1999, '한국에서의 초전도재료 및 전자소자 연구,' 초전도와 저온공학, 제l권, pp. 10-17

3.
이경수, 1998, 'KSTAR 과제:차세대 정상상태 초전도 Tokamak 실험,' 1998년도한국초전도저온 공학회 연차총회 및 국제심포지엄논문집, pp. 35-43

4.
Easton D. S. and Koch C. C, 1978, 'Mechanical Properties of Superconducting NbTi composites,' Advances in Cryogenic Engng., Vol. 24 pp. 453-462

5.
신형섭, Katagiri K., 이해무, 1995,'극저온에서 실용 초전도 복합선재의 인장특성평가,' 대한기계학회 1995년도 추계학술대회 논문집(I) pp. 752-756

6.
Ekin J. W., 1978, 'Fatigue and Stress Effects in NbTi and Nb3Sn Multifilamentary Superconductors,' Advances in Cryogenic Engng., Vol. 24, K. D. Timmerhaus, R. P. Reed and A. F. Clark, eds., Plenum Press, New York, pp. 306-316

7.
For example; ASTM STP 1159, 1993, 'Standardization of Fretting Fatigue Test Methods and Equipment,' M. H. Attia and R. B. Waterhouse edited, Pliladelphia

8.
Flukiger R., Drost E. and Speaking W., 1984, J. Appl. Phys., Vol. 504. p. 2869

9.
福本將彦, 1986, 超傳導線材에 있어서 應力/變形率 效果와 安定性, 大板大學博士學位論文

10.
박종철, 이규원, 류강식, 오상수, 권영길, 1997, 'Cu/Nb- Ti 초전도체의 임계전류 측정에 관한 연구,' 국립기술품질원보고서

11.
Iwasaki N., Hojo M., Ochiai S., et al, 1996, 'Fatigue Fracture Mechanisms and Superconducting Property of Nb-Ti Super- conducting Composite Wire,' Proc. of JSME MMD No. 96-1 pp. 677-678

12.
Taya M. and Arsenault R. J., 1989, 'Metal Matrix Composites,' Pergamon Press

13.
Hitotsuyanagi H., 1978, 'Stress Effects in Superconducting Nb-Ti Wires,' Cryogenic Engineering, Japan, Vol. 13, No. 3 pp. 114-129