JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A Comparative Study on the Cyclic Behavior and Fatigue Life of Cast and Extruded SiC -Particulate - Reinforced Al-Si Composites
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Comparative Study on the Cyclic Behavior and Fatigue Life of Cast and Extruded SiC -Particulate - Reinforced Al-Si Composites
Go, Seung-Gi; Lee, Gyeong-Yeop;
  PDF(new window)
 Abstract
The low-cycle fatigue behaviors of cast AI-Si alloy and composite with reinforcement of SIC particles were compared with those of extruded unreinforced matrix alloy and composite in order to investigate the influence of cast and extrusion processes on the cyclic deformation and fatigue life. Generally, both cast and extruded composites including the unreinforced alloy exhibited cyclic hardening behaviour, with more pronounced strain-hardening for the composites with a higher volume fraction of the SiC particles. However, cast composite under a low applied cyclic strain showing no observable plastic strain exhibited cyclic softening behavior due to the cast porosities. The elastic modulus and yield strength of the cast composite were found to be quite comparable to those of the extruded composite, however, the extrusion process considerably improved the ductility and fracture strength of the composite by effectively eliminating the cast porosities. Low-cycle fatigue lives of the cast alloy and composite were shorter than those of the extruded counterparts. Large difference in life between cast and extruded composites was attributed to the higher influence of the cast porosities on the fatigue life of the composite than that of the unreinforced alloy material. A fatigue damage parameter using strain energy density effectively represented the inferior life in the low-cycle regime and superior life in the high-cycle regime for the composite, compared to the unreinforced alloy.
 Keywords
Particulate-Reinforced Composite;Cycle Plasticity;Porosity;Low-Cycle Fatigue Damage;
 Language
Korean
 Cited by
 References
1.
Clyne, T.W. and Withers, P.J., 1993, An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge

2.
Rohatgi, P, 1991, 'Cast Aluminum-Matrix Composites for Automotive Applications,' J. Minerals, Vol.43, No.4, pp. 10-15

3.
Srivatsan, T.S., 1992, 'The Low-Cycle Fatigue Behavior of an Aluminum-Alloy-Ceramic- Particle Composite,' Int. J. Fatigue, Vol.14, pp. 173-182 crossref(new window)

4.
Wang, L., Sun, Z.M., Kobayashi, T., Toda, H. and Wang, Z.G., 1996, 'Cyclic Deformation and Low Cycle Fatigue Behavior in a 6061 Al/22% Vol. SiC Whisker Composite,' Materials Transactions, JIM, Vol. 37, pp. 763-768

5.
Xia, Z., Ellyin, F. and Meijer, G., 1997, 'Mechanical Behavior of $Al_2O_3$-Particle-Reinforced 6061 Aluminum Alloy under Uniaxial and Multiaxial Cyclic Loading,' Composites Science and Technology, Vol. 57, pp. 237-248 crossref(new window)

6.
Srivatsan, T.S. and Lavernia, E.J., 1993, 'Effects of Microstructure on the Strain-controlled Fatigue Failure Behavior of an Aluminurnalloy/Ceramic-particle Composite,' Composites Science Technology, Vol. 49, pp. 303-313

7.
Vyletel, G.M., Allison, J.E. and Sachdev, A.K., 1993, 'The Influence of Matrix Microstructure and TiC Reinforcement on the Cyclic Response and Fatigue Behavior of 2219 Al,' Metallurgical Transactions A, Vol. 24A, pp. 2545-2557

8.
Shang, J.K. and Ritchie, R.O., 1989, 'On the Particle-Size Dependence of Fatigue-Crack Propagation Thresholds in SiC-Particulate-Reinforced Aluminum-Alloy Composites: Role of Crack Closure and Crack Trapping,' Acta Metall., Vol. 37, No. 8, pp. 2267-2278

9.
Han, N;L., Wang, Z.G. and Sun, L., 1995, 'Effect of Reinforcement Size on Low Cycle Fatigue Behavior of SiC Particle Reinforced Aluminum Matrix Composites,' Scripta Metalturgica et Materialia, Vol. 33, No. 5, pp. 781-787 crossref(new window)

10.
Hu, J., Kumai, S., Higo, Y. and Nunomura, S., 1993, 'The Effect of Microstructural Characteristics on Fatigue Crack Growth in SiC Particulate-Reinforced Cast Aluminum Alloy Composites,' Fatigue '93, pp. 1123-1128

11.
양유창, 송정일, 봉하동, 한경섭, 1995, '단섬 유강화 금속복합재료의 반복적 변형 및 피로특성,' 대한기계학회논문집, 제19권, 6호, pp. 1422-1430

12.
최영근, 이택순, 이문환, 1995, 'SiC 업자강화 알루미늄기 복합재료의 표면미소 피로균열의 발생 및 진전거동,' 대한기계학회논문집, 제19 권, 제11호, pp. 2787-2796

13.
서영호, 강충길, 1996, '용탕제조법에 의하여 제조된 SiCp/Al 복합재료의 2차성형가공이 기계적 성질에 미치는 영향,' 대한기계학화논문집 (A), 제20권, 제11호, pp. 3474-3490

14.
Sasaki, M., Lawson, L. and Meshii, M., 1994, 'Low-Cycle Fatigue Properties of a SiC Whisker-Reinforced 2124 Aluminum Alloy,' Metallurgical Transactions, Vol. 25A, pp. 2265-2274 crossref(new window)

15.
Christman, T. and Suresh, S., 1988, 'Microstructural Development in an Aluminum Alloy-SiC Whisker Composite,' Acta Metall., Vol. 36, No. 7, pp. 1691-1704 crossref(new window)

16.
Golos, K. and Ellyin, F., 1988, 'A Total Strain Energy Density Theory for Cumulative Fatigue Damage,' J. Pressure Vessel Technology, Vol. 110, pp. 36-41