JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Control of Biped Robots Based on Impedance Control and Computed-Torque Control
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Control of Biped Robots Based on Impedance Control and Computed-Torque Control
Jeong, Ho-Am; Park, Jong-Hyeon;
  PDF(new window)
 Abstract
This paper proposes a hybrid control method of using impedance control and the computed-torque control for biped robot locomotion. Computed torque control is used for supporting (constrained) leg. For the free leg, the impedance control is used, where different values of impedance parameters are used depending on the gait phase of the biped robot. To reduce the magnitude of an impact and guarantee a stable footing when a foot contacts with the ground, this paper proposes to increase the damping of the leg drastically and to modify the reference trajectory of the leg. Computer simulations with a 3 -dof environment model for which a combination of a nonlinear and a linear compliant models is used, show that the proposed controller is superior to the computed-torque controllers in reducing impacts and stabilizing the footing.
 Keywords
Biped Robot;Biped Locomotion;Hybrid Control;Impedance Control;Computed-Torque Control;Contact Stability;Environment Model;
 Language
Korean
 Cited by
1.
2족 보행 로봇의 보행 안정성 향상을 위한 ZPM보상 및 임피던스 제어,정호암;박종현;

대한기계학회논문집A, 2000. vol.24. 4, pp.1007-1015 crossref(new window)
 References
1.
Fujimoto, Y. and Kawamura, A., 1995, 'Three Dimensional Digital Simulation and Autonomous Walking Control for Eight-Axis Biped Robot,' Proc. IEEE Int. Conf. on Robotics and Automation, pp. 2877-2884, Nagoya crossref(new window)

2.
Fujimoto, Y. and Kawamura, A., 1997, 'Biped Walking Control with Optimal Foot Force Distribution by Quadratic Programming,' Proc. Advanced Intelligent Mechatronics, Tokyo crossref(new window)

3.
Volpe, R. and Khosla, P., 1993, 'A Theoretical and Experimental Investigation of Impact Control for Manipulators,' Int. J. of Robotics Research, Vol.12, No.4, pp. 351-365 crossref(new window)

4.
Yamaguchi, J., Takanishi, A., and Kato, I., 1995, 'Experimental Development of a Foot Mechanism with Shock Absorbing Material for Acquisition of Landing Surface Position Information and Stabilization of Dynamic Biped Walking,' Proc. IEEE Int. Conf. on Robotics and Automation, pp. 2892-2899, Nagoya, Japan crossref(new window)

5.
Marhefka, D.W and Orin, D.E., 1996, 'Simulation of Contact Using a Nonlinear Damping Model,' Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1662-1668, Minneapolis, MN crossref(new window)

6.
Kraus, P.R. and Kumar, V., 1997, 'Compliant Contact Models for Rigid Body Collisions,' Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1382-1387, Albuquerque, NM crossref(new window)

7.
Park, J.H. and Kim, K.D., 1998, 'Biped Robot Walking Using Gravity-Compensated Inverted Pendulum Mode and Computed-Torque Control,' Proc. IEEE Int. Conf. on Robotics and Automation, pp. 3528-3533, Leuven, Belgium crossref(new window)

8.
Hogan, N., 1986, 'Impedance Control: An Approach to Manipulation: Part I-III,' J. of Dynamic Systems, Measurement, and Control, Vol. 107, pp. 1-24

9.
Winter DA, 1980, 'Overall Principle of Lower Limb Support During Stance Phase of Gait,' J. of Biomechanics, Vol. 13, pp. 123-127 crossref(new window)

10.
Kazerooni, H., Sheridan, T.B., and Houpt, P.K, 1986, 'Robust Compliant Motion for Manipulators, Part I: The Fundamental Concepts of Compliant Motion,' IEEE J. of Robotics and Automation, Vol. 2, No.2, pp. 83-92

11.
Oh, S.Y. and Orin, D.E., 1986, 'Dynamic Computer Simulation of Mutiple Closed-Chain Robotic Mechanism,' Proc. IEEE Int. Conf. On Robotics and Automation, pp. 15-20

12.
김경대, 박종현,1999, '중력보상 역진자 모드를 이용한 2 족보행 로봇의 거동 및 제어,' 대한기계학회논문집 A 권, 제 23 권, 제 2 호, pp. 209-216