JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Dynamic Bulging Behavior Analysis by Finite Difference Method in High Speed Continuous Casting of Thin Slab
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Dynamic Bulging Behavior Analysis by Finite Difference Method in High Speed Continuous Casting of Thin Slab
Jeong, Yeong-Jin; Sin, Geon; Jo, Gi-Hyeon; Gang, Chung-Gil;
  PDF(new window)
 Abstract
Continuous casting process has been adopted increasingly in recent years to save both energy and labor. It has experienced a rapid development in the production of semi-finished steel products, rep lacing the conventional route of ingot casting and rolling. In order to achieve this merit, however, more studies about the mechanism between roll and slab are needed. In this paper, a dynamic bulging in steel cast slabs was simulated by considering the solidification and heat transfer. This study is to prevent internal cracks of a slab in a bending and unbending zone. The value of moving strand shell bulging between two supporting rollers under the ferrostatic pressure and slab-self weight has been calculated in terms of creep and elasto-plasticity. The strain and strain rate distributions in solidified shell undergoing a series of bulging are calculated with working boundary conditions.
 Keywords
Internal Crack;Dynamic Bulging;High Speed Continuous Casting;Creep;
 Language
Korean
 Cited by
 References
1.
Uehara, M., Samarasekera, I., and Brimacombe, J. K., 1986, 'Mathematical Modeling of Unbending of Continuously Cast Steel Slabs,' Ironmaking Steelmaking, Vol. 13, No. 3, pp. 138-153

2.
Miyazaya, K. and Schwerdtfeger, K., 1974, 'Computation of Bulging of Continuously Cast Slabs with Simple Bending Theory,' Ironmaking Steelmaking, No. 2, pp. 68-74

3.
Palmers, A., Etinne, A. and Mignon, J., 1979, 'Calculation of the Mechanical and Thermal stresses in Continuously Cast Strands,' Stahl U. Eisen, pp. 1039-1050

4.
Wada, Y., Ito Y. and Nagano, H., 1985, 'Mechanics Related Behavior in Continuous Casting,' Ed. by Comm. on Mechanics Related Behavior in Continuous Casting, The Joint Soc. Iron Steel Basic Res., ISIJ, Tokyo, pp. 124-127

5.
Okamura K. and Kawashima, H., 1989, 'Three-dimensional Elasto-plastic and Creep Analysis of Bulging in Continuously Cast Slabs,' ISIJ, pp. 91-98

6.
Kang, C. G. and Yun, K. S., 1988, 'An Analysis of Deformation Behavior on Dynamic Bulging in the High Speed Continuous Casting,' J. KSME, Vol. 12, No. 6, pp. 1217-1226

7.
Tacke, K. H., 1985, 'Multi-Beam Model of Strand Straightening in Continuous Casting,' Ironmaking Steelmaking, Vol. 12, No. 2, pp. 147-154

8.
Fukawa, K., Matsumoto, H. and Nakajima, K., 1982, 'Rheological Analysis of Bulging of Continuously Cast Slabs with Elementary Bending Theory,' J. Iron and Steel Ins., Vol. 12, No. 7, pp. 86-90

9.
Barber, B., Lewis, B. A. and Leckenby, B. M., 1985, 'Finite Element Analysis of Strand Deformation and Strain Deformation and Strain Distribution on Solidifying Shell during Continuous,' Ironmaking Steelmaking. Vol. 12, No. 4, pp. 171-175

10.
EI-Bealy, M., Leskinen, N. and Fredriksson, H., 1995,'Simulation of Cooling Conditions in Secondary Cooling Zones in Continuous Casting process,' Ironmaking Steelmaking, Vol. 22, No. 3, pp. 246-255

11.
Savage, J. and Pitchard, W. H., 1954, J. Iron and Steel Ins., Nov., pp. 269-277

12.
Mitsutsuka, M., 1968, 'Study on the Water Spray Cooling Plate at High Temperature,' J. Iron and Steel Ins., Vol. 54, No. 14, pp. 1457-1471

13.
Fukumi J., 1984, 'Application of Mist Spray on Fukuyama No. 4 Slab Caster,' Tetsu-to Hagane, Vol. 70, No. 2, S993

14.
Private Communication with POSCO

15.
Misaka Y., YOSHIM, T. and OTO, 1967, 'Formulations Mean Resistance to Deformation for Plain Carbon Steels at Elevated Temperature,' J. JSTP, Vol. 8 No.79, pp. 414-422

16.
Inouye, K., 1968, 'Studies on Hot Working Strength of Steel,' J. Iron and Steel Ins., Vol. 41, No. 6, pp. 593-601

17.
Matsumiya, T., Ito, M., Kajioka, H., 1986, 'An Evaluation of Critical Strain for internal Crack Formation in Continuously Cast Slabs,' ISIJ, Vol. 26, pp. 542-546

18.
Kodama, H., Niyama, E. and Enso, M., 1984, 'Effects of Compressive Stress on Internal Crack Formation of Continuously cast Slabs,' ISIJ, Vol. 24, pp. 396-400

19.
Sorimachi, K., Emi, T., 1977, 'Elasto-plastic Stress Analysis of Bulging as a Major Cause of Internal Cracks in Continuously Cast Slabs,' J. Iron and Steel Ins., Vol. 63, No. 8, pp. 1297-1304

20.
Wunnenberg, K. and Flender, R., 1985, 'Investigation of Internal Crack Formation in Continuous Casting Using a Hot Model,' Ironmaking Steelmaking, Vol. 12, No. 1