Advanced SearchSearch Tips
Measurement of the Shape of the Cold Neutron Source Vertical Hole by Ultrasonic Wave Sensor
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Measurement of the Shape of the Cold Neutron Source Vertical Hole by Ultrasonic Wave Sensor
Park, Guk-Nam; Choe, Chang-Ung; Sim, Cheol-Mu;
  PDF(new window)
The HANARO (High-flux Advanced Neutron Application Reactor) has operated since 1995. The Cold Neutron(CN) hole was implanted in the reflector tank from the design stage. Before a vacuum chamber and a moderator cell for the cold neutron source are installed into the CN hole, it is necessary to measure the exact size of the inside diameter and thickness of the CN hole to prevent the interference problem. Due to inaccessibility and high radiation field in the CN hole, a mechanical measurement method is not permitted. The immersion ultrasonic technique is considered as the best method to measure the thickness and the diameter. The 4 axis manipulator of the 2 channel of a sensor module was fabricated. The transducer of 10 MHz results in 0.03 nun of resolution. The inside diameter and thickness for 550 points of the CN hole were measured using 2 channel ultrasonic sensors. The results showed that the thickness is in the range of 13-6.7 mm and inside diameter is in the range of o 156-165. These data will be a good reference in the design of a cold neutron source facility.
Cold Neutron Vertical Hole;Ultrasonic Immersion Method;4-Axis Manipulator;HANARO;
 Cited by
박국남, 박종학, 조만순, 최창웅, 유성연, 1999, '하나로 냉중성자원 감속재 냉각에 관한 연구,' 한국초전도·저온공학회, 제 1회 학술대회 논문집, pp. 177-181

조만순, 박국남, 이병철, 손재민, 박상준, 심철무, 최창웅, 'Heat Load Measurement in the Vertical Hole for Installation of Hanaro CNS,' Proceeding of The 6th Asian Symposium on Research Reactor, JAERI-Conf99-006, pp. 385-391

박국남, 심철무, 최영현, 구길모, 이용섭, 최창웅, 1999, '냉중성자원 수직공 초음파 형상측정 및 표면검사,' KAERI/RR-1261/99

최창웅, 조만순, 박국남, 손재민, 심철무, 최영현, 이무용, 1999, '냉중성자원 개발,' KAERI/RR/1916/98, pp. 117-215

권경우, 강형모, '측정공학,' p. 73, pp. 158-165

Albert S.Birks, Robert E.Green Jr., Paul Mclintire, 1991, 'Nondestructive Testing Handbook'- Vol. 7 Ultrasonic Testing, American Society for Nondestructive Testing, p. 198, p. 259, pp. 369-373

Sterfan Kocis, Zdenko Figura, 1996, Ultrasonic Measurements and Technologies, Chapman & Hall, pp. 15-16

임종환, 조동우, 1992, '확률지도를 이용한 자율이동로봇의 경로계획,' 대한기계학회논문집, 제16권, 제4호, pp. 675-683