Advanced SearchSearch Tips
Wear and Operation Characteristics of Acetal and Nylon Pinion Against Steel Gear
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Wear and Operation Characteristics of Acetal and Nylon Pinion Against Steel Gear
Kim, Chung-Hyeon; Lee, Seong-Cheol; An, Hyo-Seok; Jeong, Tae-Hyeong;
  PDF(new window)
Wear and operation characteristics of Nylon and Acetal pinion against steel gear were studied to gain a better understanding of their tribological and mechanical behavior. Tests were conducted with power circulating gear test rig under unlubricated conditions. Specific wear rates were measured as a function of applied load and total revolution. The worn tooth surfaces were examined with a profile projector and camera. Nylon pinion showed lower specific wear rates than Acetal pinion, but it revealed breakage at high load. Principal wear depths were developed at tooth tip and below the pitch line of pinion. Life estimation for the Nylon pinion was made by taking into account steel gear equivalent Hertz stress and average sliding velocity. The dominant wear mechanisms were adhesion and abrasion
Wear;Acetal Pinion;Nylon Pinion;Machine Element;Specific Wear Rate;Life of Pinion;
 Cited by
플라스틱스퍼기어의 내구성향상에 관한 실험연구,김충현;안효석;정태형;

대한기계학회논문집A, 2002. vol.26. 9, pp.1914-1922 crossref(new window)
이기만, 정동천, 1992, '플라스틱 해설과 물성집,' 한국플라스틱기술정보

한영수, 현동훈, 박원규, 정태형, 1999, '성형플라스틱 기어 핸드북,' 일진사

Clerico, M., 1980, 'Tribological Behavior of Polyacetals,' Wear, Vol. 64, p. 259 crossref(new window)

Kang, T., Kim, Y., Cho, W. and Ha, C., 1997, 'Effects of Amorphous Nylon on the Properties of Nylon,' Polymer Testing, Vol. 16, pp. 391-401 crossref(new window)

Vai, M., Xue, Q., Guo, H., 1992, 'Reciprocal Sliding Wear of SiC Particle-reinforced Al-Cu Aluminum Matrix Composites against Stainless Steel, High Speed Tool Steel and Ceramics II. Wear Mechanisms,' Wear, Vol. 194, pp. 126-136 crossref(new window)

Uchiyama, Yoshitaka, 1992, 'Survey of Polymer Tribology,' Japanese Journal of Tribology, Vol. 37, No. 6, pp. 657-665

강석춘, 정대원, 1998, '오일함침형 고분자량 나일론의 마찰특성에 관한 연구, 대한기계학회논문집A권, 제22권, 제11호, pp. 2011-2020

이성철, 김충현, 권오관, 허용정, 1996, '설계인자 보정방법에 의한 사출성형기어의 캐비티 설계,' 대한기계학회논문집A, 제20권. 제10호, pp. 3142-3151

塚本尙久, 昭和 54, 'フラスチック齒車の强度に關する硏究,' 日本機械學會論文集 C編, 45卷, 391號, pp. 382-390

塚本尙久, 昭和 55, 'フラスチック齒車の强度に關する硏究(第2報),' 日本機械學會論文集 C編, 46卷, 409號, pp. 1116-1126

塚本尙久, 昭和 56, 'フラスチック齒車の强度に關する硏究(第3報),' 日本機械學會論文集 C編, 47卷, 416號, pp. 474-483

塚本尙久, 失野 透, 坂井廣志, 昭和 57, 'ナイロン齒車の齒形變化にともなう騷音及び傳達效率,' 日本機械學會論文集 C編, 48卷, 425號, pp. 95-105

塚本尙久, 昭和 54, 'フラスツク齒車の强度に關する硏究(第6報),' 日本機械學會論文集 C編, 50卷, 459號, pp. 2165-2173

김충현, 안효석, 정태형, 2000, '나일론과 폴리아세탈의 마찰마멸에 관한 고찰,' 대한기계학회논문집A권, 제24권, 제3호, pp. 786-793