Advanced SearchSearch Tips
Crack Initiation Life Analysis in Notched Pipe Under Cyclic Bending Loads
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Crack Initiation Life Analysis in Notched Pipe Under Cyclic Bending Loads
Gwak, Sang-Rok; Lee, Jun-Seong; Kim, Yeong-Jin; Park, Yun-Won;
  PDF(new window)
In order to improve Leak-Be(ore-Break methodology, more precisely the crack growth evaluation, a round robin analysis was proposed by the CEA Saclay. The aim of this analysis was to evaluate the crack initiation life, penetration life and shape of through wall crack under cyclic bending loads. The proposed round robin analysis is composed of three main topic; fatigue crack initiation, crack propagation and crack penetration. This paper deals with the first topic, crack initiation in a notched pipe under four point bending. Both elastic-plastic finite element analysis and Neuber's rule were used to estimate the crack initiation life and the finite element models were verified by mesh-refinement, stress distribution and global deflection. In elastic-plastic finite element analysis, crack initiation life was determined by strain amplitude at the notch tip and strain-life curve of the material. In the analytical method, Neuber's rule with the consideration of load history and mean stress effect, was used for the life estimation. The effect of notch tip radius, strain range, cyclic hardening rule were examined in this study. When these results were compared with the experimental ones, the global deformation was a good agreement but the crack initiation cycle was higher than the experimental result.
Four Point Bending;Leak-Before-Break;Cyclic-Curve;Strain-life Curve;
 Cited by
국부 변형률 근사를 이용한 원통형 노치시편의 피로균열 발생수명의 예측,임재용;홍성구;이순복;

대한기계학회논문집A, 2004. vol.28. 6, pp.791-798 crossref(new window)
USNRC, 1984, 'Evaluation of Potential for Pipe Break,' NUREG 1061, Vol. 3

OECD/NEA, 1997, 'Report of the Benchmark on the Fatigue Propagation of a Semi-Elliptical Crack in Plate Subjected to Cyclie Bending,' NEA/CSNI/R(97)8

Chapuliot, S., 1998, 'Benchmark Proposition on a Cracked Pipe Subjected to a Cyclic Four Point Bending,' CEA Sclay-SEMT /LISN

Neuber, H., 1961, 'Theory of Stress Concentration for Shear-Strained Prismatical Bodies with Arbitrary Nonlinear Stress Strain Laws,' J. Appl. Mech. Trans. ASME, Vol E28, Neuber Equation

RCC-MR, 1985, 'Design and Construction Rules for Mechanical Components of FBR Islands,' Subsection Z : Technical appendix A3

Paris, P.C. and Erdogan, F., 1963, 'A Critical Analysis of Crack Propagation Laws,' J. of Basic Eng., Trans. of ASME, Vol. D85

ABAQUS, 1999, 'Theory Manual - Metal Plasticity Model,' ABAQUS Ver. 5.8, Hibbitt, Karlsson & Sorensen, Inc,

Bauschinger, J., 1886, 'Mitt. tech., Lab. Munchen,' No. 1, Vol. 13

Bensussan, P., Mass, E., Pellous, R. and Pineau, A., 1988, 'Creep Crack Initiation and Propagation : Fracture Mechanics and Local Approach,' J. of Pressure Vessel Technology, Vol 110

Peterson, R.E., 1974, Stress concentration factors, John Wiley and Sons

Basquin, O.H., 1910, 'The Exponential Law of Endurance Tests,' ASTM, Vol. 10

Coffin, L.F., 1954, 'A Study of the Effects of Cyclie Thermal Stresses on a Ductile Material,' Trans. ASME, Vol. 76

Manson, S.S., 1953, 'Behavior of Materials Under Conditions of Thermal Stress,' Heat Transfer Symposium, Univ. of Michigan Engineering Research Institute

산업설비 안전성평가 연구센터, 1991, '굽힘피로 하중을 받는 배관의 피로균열 발생수명 예측을 위한 Round-Robin 해석,' SAFE 99-19