JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of Fiber Optic Accelerometer for Third-Party Damage Detection
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Fiber Optic Accelerometer for Third-Party Damage Detection
Park, Ho-Rim; Choe, Jae-Bung; Kim, Yeong-Jin;
  PDF(new window)
 Abstract
Recently, a number of underground pipelines have been drastically increased. The integrity of these buried pipelines, especially gas transmitting pipelines, is of importance due to an explosive characteristic of natural gas. The third party damage is known as one of the most critical factor which causes fatal accidents. For this reason, a number of systems detecting third party damage are under development. The major concern in the development of third party damage detection system is to transmit vibration signals out of accelerometer to signal conditioner and data acquisition system without any interference caused by noise. The objective of this paper is to develope a fiber optic accelerometer applicable to third party damage detection system. A fiber optic accelerometer was developed by use of combining principles of one degree of freedom vibration model and an extrinsic Fabry-Perot interferometer. The developed fiber optic accelerometer was designed to perform with a sensitivity of 0.06mVg, a frequency range of less than 6kHz and an amplitude range of -200g to 200g. The developed, accelerometer was compared with a piezoelectric accelerometer and calibrated. In order to verify the developed accelerometer, the field experiment was performed. From the field experiment, vibration signals and the location of impact were successfully detected. The developed accelerometer is expected to be used for the third party damage detection system which requires long distance transmission of signals.
 Keywords
Third Party Damage;Fabry-Perot Interferometer;Optical Fiber;Accelerometer;
 Language
Korean
 Cited by
 References
1.
김형식, 김우식, 홍성호, 방인완, 오규환, 1999, '매설 천연가스 배관의 응력에 미치는 제반하중의 영향,' 대한기계학회논문집(A), 제23권, 제8호, pp. 1261-1269

2.
Leewis, K. and Shires,T. M., 1999, 'Managing third party damage,' International Conference on Advances in welding technology

3.
조성호, 전경수, 박경완, 조용범, 이선엽, 고영태, 2000, '진동신호를 이용한 타공사 조기 감시기술 연구(Ⅰ),' 한국가스학회지, Vol. 4, No. 1, pp. 1-8

4.
Marty, J., Malki, A., Renouf, C., Lecoy, P. and Bailieu, F., 1995, 'Fiber-Optic Accelerometer Using Silicon Micromachining Techniques,' Sensors and Actuators A, pp. 470-473 crossref(new window)

5.
Petko, D., Dinev, 1996, 'Two Dimensional Fiber-Optical Accelerometer,' American Institute of Physics, Vol. 67, No. 1, pp. 288-290 crossref(new window)

6.
Chen, C., Ding, C., Zhang, D. and Cui, Y, 1998, 'Michelson Fiber-Optic Accelerometer,' American Institute of Physics, Vol. 69, No. 9, pp. 3123-3126 crossref(new window)

7.
전병선, 김경진, 박현철, 황운봉, 박위상, 1996, '광섬유 센서를 이용한 복합적층보의 진동제어,' 대한기계학회 춘계학술대회논문집(A), pp. 321-324