Advanced SearchSearch Tips
A Study on Fatigue Crack Growth Analysis of Inclined Cracked Plate with Composite Patched Repair
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on Fatigue Crack Growth Analysis of Inclined Cracked Plate with Composite Patched Repair
Jeong, Gi-Hyeon; Yang, Won-Ho; Kim, Cheol;
  PDF(new window)
Fatigue crack growth behavior of inclined cracked Al 6061-T6 thick aluminum plate(6mm) repaired with the bonded composite patch was studied. A 0°inclined crack bonded reinforced composite patch and 15°, 30°, 45°, 60°inclined crack plates were tested. The effect of patch and inclined angle were studied and compared to each other. Also we investigated to the crack propagation direction and debonding behavior during the fatigue crack growth test. In this paper. a study was con(ducted to get an fatigue life, fatigue crack growth ratio and crack growth direction. Finally, the effectiveness of composite patch on inclined cracked plate was investigated. The results demonstrated thats there was a definite variation in fatigue life and fatigue crack growth behavior depending on the inclined crack angle.
Inclined Crack;Stress Intensity Factor;Composite Material;Fatigue Life;Fatigue Crack Growth Rate;
 Cited by
Comparison of the Fatigue Behaviors of FRP Bridge Decks and Reinforced Concrete Conventional Decks Under Extreme Environmental Conditions,Kwon, Soon-Chul;Piyush K. Dutta;Kim, Yun-Hae;Anido, Roberto-Lopez;

Journal of Mechanical Science and Technology, 2003. vol.17. 1, pp.1-10
Rastogi, N., Soni,S. R. and Denny,J. J., 1998, 'Analysis of Bonded Composite Patch Repaired Metallic Structures : An Overwiew,' AIAA-98-1883, pp. 1578-1588

Caruso, R. P., 1991, 'Boron/epoxy Composites for Aircraft Structural Repair,' Composite Polymers, Vol. 4, No. 4, pp. 242-250

Sethuraman, R. aand Maiti, S. K., 1989, 'Determination of Mixed Mode Stress Intensity Factors for a Crack-stiffened Panel,' Engineering Fracture Mechanics, Vol. 33, No. 3, pp. 355-369 crossref(new window)

Chung, K. H., Yang, W. H. and Cho, M. R., 2000, 'Fracture Mechanics Analysis of Cracked Plate Repaired by Composite Patch,' Key Engineering Material, Vols. 183-187, pp. 43-48

정기현, 양원호, 조명래, 2000, '보강재로 보수된 균열평판의 파괴역학적 해석(I),' 대한기계학회논문집 A권, 제24권 제8호, pp. 2000-2006

정기현, 양원호, 조명래, 2000, '보강재로 보수된 균열평판의 파괴역학적 해석(II),' 대한기계학회논문집 A권, 제24권 제9호, pp. 2246-2251

임상전, 임채환, 장창두, 1983, '경사진 보강재가 붙은 평판의 강도해석,' 대한조선학회지, 제20권, 2호, pp. 43-50

이강용, 김옥환, 1998, '혼합형 하중하에 있는 판재로 보강된 균열판의 응력세기계수,' 대한기계학회 논문집 A권, 제 22권 제3호, pp. 569-578

김위대, 1999, '복합재료를 이용한 노후 항공기의 손상보수 기술 연구,' 한국항공우주공학회지, 제 27권 제 7호, pp. 37-43

Labor, J. G. and Ratwani, M. M., 'Development of Bonded Composite Patch Repairs for Cracked Metal Structures - final report,' Report No.NADC-79066-60, vol. 1, United States Navy-Naval Air Development Center, Warminister, PA 18974

Denney, J. J. and Mall, S., 1997, 'Characterization of Disbond Effects on Fatigue Crack Growth Behavior in Aluminum Plate with Bonded Composite Patch,' Engineering Fracture Mechanics, Vol. 57, No. 5, pp. 507-525 crossref(new window)

Naboulsi, S. and Mall, S., 1997, 'Fatigue Crack Growth Analysis of Adhesively Repaired Panel Using Perfectly and imperfectly Composite Patchers,' Theoretical and Applied Fracture Mechanics, Vol. 28, pp. 13-28 crossref(new window)

Schubbe, J. J. and Mall, S., 1999, 'Investigation of a Cracked Thick Aluminum Panel Repaired with a Bonded Composite Patch,' Engineering Fracture Mechanics, vol. 63, pp. 305-323 crossref(new window)

ASTM E647-93, 'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' pp. 679-706