Advanced SearchSearch Tips
A Study on the Vibration Characteristics of Stiffened Cylinder
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on the Vibration Characteristics of Stiffened Cylinder
Kim, Gwang-Rae; Jang, Yong-Hun;
  PDF(new window)
The structural characteristics of the stiffened double cylinder was investigated through experiment and analysis. The outside cylinder was excited with piezoelectric actuator and the mode shape of the cylinder with stiffening T frame was obtained by using holographic interferometry. Finite element method was applied for further modal investigation of the stiffened cylinder. The experimental results showed that the mode shape of cylinder was dependent on the exciting frequencies and the T frame showed salient effect of damping at most of the resonent frequencies. In particular frequencies, the T frame worked as a transmitter. FFM showed similar results with the experiments. This paper showed that the laser-based method such as holographic interferometry is well suited for investigation of the whole-field mode shapes and FEM has good performance to estimate the medal characteristics of the mechanical structure.
Holographic Interferometry;FEM;Hologram;Fringe Pattern;Stiffened Cylinder;
 Cited by
Kyosti, A., Ek, L., and Molin, N., 1985, 'Four Ways to Determine Modes of Vibration in a Plate,' International Modal Analysis Conference, pp. 627-633

Gabor, D., 1948, 'A New Microscopic Principle,' Nature, Vol. 161, pp. 777-778

Leith, E. and Upatnieks, J., 1963, 'Wavefront Reconstruction with Continuous-tone Objects,' J. of Opt. Soc. Am., Vol. 53, pp. 1377-1381

Osterberg, H., 1932, 'An Interferometer Method of Studying the Vibrations of an Oscillating Quartz Plate,' J. of Opt. Soc. Am., Vol. 22, No. 19, pp. 19-35

Powell, R. L., and Stetson, K. A., 1965, 'Interferometric Vibration Analysis by Wave-Front Reconstruction,' J. of Opt. Soc. Am., Vol. 55, No. 12, pp. 1593-1598

Raj, D. M., Narayanan and Khadakkar, A. G., 1995, 'Effect of Ring Stiffeners on Vibration of Cylindrical and Conical Shell Models,' J. of Sound and Vibration, Vol. 179, No. 3, pp. 413-426 crossref(new window)

Lee, K. B., Park, S. J., Kwon, Y. K., Lee, B. H. and Yun, H. S., 1992, 'Three-dimensional Displacement and Strain of a Vibrating Plate Determined by Holographic Interferometry and the Finite Element Method,' J. of Sound and vibration, Vol. 153, No. 1, pp. 63-75

Fallstrom, K. E., Gustavsson, H., Molin, N. E., and Wahlin, A., 1989, 'Transient Bending Waves in Plates Studied by Hologram Interferometry,' Experimental Mechanics, Vol. 29, No. 4, pp. 378-387 crossref(new window)

최장섭, 강영준, 1996, '전자 광학적 홀로그래픽 간섭법을 이용한 진동 물체의 모드형태 계측법,' 대한기계학회논문집, 제20권, 제2호, pp. 564-574

Hazell, C,. R. and Mitchell, A. K., 1986, 'Experimental Eigenvalues and Mode Shapes for Flat Clamped Plates,' Experimental Mechanics Bethel, Society for Experimental Mechanics, Inc., Vol. 26, No. 4, pp. 337-344

Aprahamian, R., and Evensen, D. A., 1970, 'Applications of Holography to Dynamics: High-Frequency Vibrations of Plates,' Journal of Applied Mechanics, Vol. 37, No. 4, pp. 1083-1090

Zhu, N. H., 1998, 'Study of the Vibration of Bulkhead-Stiffened Cylindrical Shells by Laser-Based Methods,' Ph.D Dissertation, Dept. of Mech. Eng., SUNY at Stony Brook