JOURNAL BROWSE
Search
Advanced SearchSearch Tips
The Mixture Ratio Effect of Epoxy Resin, Curing Agent and Accelerator on the Fatigue Behavior of FRMLs
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The Mixture Ratio Effect of Epoxy Resin, Curing Agent and Accelerator on the Fatigue Behavior of FRMLs
Song, Sam-Hong; Kim, Cheol-Ung;
  PDF(new window)
 Abstract
Fiber reinforced metal laminates(FRMLs) are new types of hybrid materials. FRMLs consists of high strength metal(Al 5052-H34) and laminated fiber with structural adhesive bond. The mixture ratio effect of epoxy resincuring agentaccelerator on the fatigue behavior of FRMLs was investigated in this study. The epoxy, diglycidylether of bisphenol A(DGEBA), was cured by methylene dianiline(MDA) with or without an accelerator(K-54). Eight different kinds of resin mixture ratios were selected for the test ; five kinds of FRMLs(1) and three others of FRMLs(2). The relationship between da/dN and ΔK with variation of resin mixture ratio was studied. FRMLs(1) and FRMLs(2) indicated approximately 2 times and 2.2 times more improved maximum bending strengths in comparison with those of Al 5052-H34. The resin mixture ratio <1:1> in case of FRMLs(1) indicated the maximum fatigue life, while the resin mixture ratio <1:1:0.2> in case of FRMLs(2) indicated the maximum fatigue life. As results, FRMLs(2) turned out to have more effective characteristics on the fatigue properties and the bending strength than those of FRMLs(1).
 Keywords
Fiber Reinforced Metal Laminates;Preprege;Epoxy Resin;Curing Agent;Accelerator;Resin Mixture Ratio;Stress Intensity Factor Range;Fatigue Crack Growth Rate;da/dN;
 Language
Korean
 Cited by
1.
Al/APRP 적층재의 수지혼합비가 인장 및 티-필(T-peel) 강도 특성에 미치는 영향,송삼홍;김철웅;

대한기계학회논문집A, 2002. vol.26. 11, pp.2374-2382 crossref(new window)
2.
반복-굽힘 모멘트의 진폭에 따른 A15052/AFRP 적층재의 층간분리 영역과 피로균열진전 거동,송삼홍;김철웅;

대한기계학회논문집A, 2001. vol.25. 8, pp.1277-1286 crossref(new window)
3.
소컷 및 원공 주위의 피로균열 형태변화와 층간분리거동 (I) - 아라미드섬유 강화 금속적층재의 경우 -,송삼홍;김철웅;

대한기계학회논문집A, 2003. vol.27. 1, pp.58-65 crossref(new window)
4.
The Fatigue Behavior and Delamination Properties in Fiber Reinforced Aramid Laminates -Case (I) : AFRP/Al Laminates-,;;

Journal of Mechanical Science and Technology, 2003. vol.17. 3, pp.343-349
5.
단일재 알루미늄과 알루미늄/유리섬유 적층재의 결함 위치에 따른 응력분포 및 균열발생 거동,송삼홍;김종성;오동준;윤광준;김철웅;

대한기계학회논문집A, 2005. vol.29. 2, pp.284-292 crossref(new window)
6.
유리섬유/알루미늄 혼성 적층판의 인장특성과 파괴인성 평가,우성충;최낙삼;

대한기계학회논문집A, 2005. vol.29. 6, pp.876-888 crossref(new window)
7.
SP-100 알루미늄 분말 에폭시의 경도 및 압축 강도 평가,한정영;김명훈;강성수;

대한기계학회논문집A, 2012. vol.36. 9, pp.1041-1046 crossref(new window)
 References
1.
Strong, A. B., 1989, 'Fundamentals of Composites Manufacturing : Materials Method and Applications, SME, Vol. 11, pp. 71-77

2.
Knox, C. E., 1982, Handbook of Composite(G. Lubin Ed.), Van Nostrand Reinhold, New York

3.
Moon, C. K., Kim, J. H. and Mater, J., 1997, Composite Polymers, Sci. Vol. 7(5), pp. 425-434

4.
Moon, C. K. and Ocean, J., 1996, Engineering and Technology, Vol. 10(1), pp. 5-7

5.
Miller, B., Muri, P. and Rebenfeld, L., 1987, 'Advanced Polymer in Aircraft,' Comp. Sci. Tech., Vol. 28, pp. 17-20 crossref(new window)

6.
Glyn Lawcock, Lin Ye and Yiu-Wing Mia, 1995, 'Novel Fiber Reinforced Metal Laminate for Aerospace Applications - A Review, Part Ⅰ-Background & General Mechanical Properties,' SAMPE Journal, Vol. 31, No. 1, pp. 23-31

7.
Lim, S. H., Ha, C. S. and Cho, W. J., 1992, 'Short Aramid Fiber Reinforced Epoxy Composites-2. Effect of Curing Acceleration of Epoxy Matrix and Mechanical Properties of Aramid Fiber Reinforced Epoxy Composite,' Polymer (Korea), Vol. 16, No. 2, pp. 216-224

8.
Annual Books of ASTM Standards, 1995, 'Standard Method for Flexural Properties of Reinforced Plastics and Electrical Insulating Material[Metric],' D 790 M

9.
Annual Books of ASTM Standards, 1995, 'Standard Test Method for Measurement Fatigue Crack Growth Rates,' Vol. 15.03, E 647

10.
Annual Books of ASTM Standards, 1995, 'Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate,' B 209

11.
Anderson, T. L., 1994, Fracture Mechanics - Fundamentals & Applications, Second Edition, CRC Press, p. 63

12.
Elber, E., 1970, 'The Significance of Fatigue Crack Closure in Composite,' ASTM STP 486, pp. 230-242

13.
Roebroeks, G. H. J. J., 1986, 'Observations on Cycle Delamination in ARALL Under Fatigue Loading,' Report LR-496, Dept. of Aerospace Eng., Delft University of Technology

14.
Tohru Takanatsu, Takashi Matsumura, Norio Ogura, Toshiyuki Shimokawa, Yoshiaki Kakuta, 1999, 'Fatigue Crack Growth Properties of GLARE3-5/4 Fiber/metal Laminates,' Engineering Fracture Mechanics, Vol. 63, pp. 253-272 crossref(new window)

15.
Su, K. B., 1989, 'Advances in Thermoplastic Matrix Composite Materials,' Ed. N. Newaz, ASTM STP 1044, p. 279