Advanced SearchSearch Tips
Program Development for Material Degradation Evaluation Using Grain Boundary Etching Method
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Program Development for Material Degradation Evaluation Using Grain Boundary Etching Method
Yu, Hyo-Seon; Baek, Seung-Se; Na, Seong-Hun; Kim, Jeong-Gi; Lee, Hae-Mu;
  PDF(new window)
It is very important to evaluate material degradation like temper and carbide embrittlements to secure the reliable and efficient operational conditions and to prevent brittle failure in service. The extent of material deterioration can be accurately evaluated by mechanical test such as impact test or creep test. But it is almost impossible to sample a large specimen from in-service plants. Thus, the material degradation evaluation by a non-destructive method is earnestly required. Recently the non-destructive test technique which uses the grain boundary etching characteristics owing to the variation of material structures has been proposed. However the program for material degradation evaluation using the grain boundary etching method(GEM) in Windows 98 domain doesnt be developed now. The aims of this paper are to develop the program and to complete the new master curve equations for the evaluation of material degradation on in-serviced high temperature components.
CVN(Charpy V-notch);SP(Small Punch);Grain Boundary Etching Method;Material Degradation;FATT;Fracture Appearance Transition Temperature;DBTT;Ductile-Brittle Transition Temperature;Grain Boundary Width(W(sub)GB;Intersection Point Ratio(N(sub)i/N(sub)o;Maximum Surface Roughness(R(sub)max;
 Cited by
遠藤忠良, 1990, '大型構造物の破壞管理への應用と課題,' 日本材料學會誌, 第39券, 第436號, pp. 89-95

한국표준과학연구원, 1991, '시험. 평가기술개발과 고온사용설비 파손방지 기술개발,' 과학기술처 연구보고서

유효선, 1998, '전기화학적 분극시험방법에 의한 고온부재의 비파괴적 뜨임취화 평가기술 개발에 관한 연구,' 한국과학재단 연구보고서

淸水健一, 野方文雄, 瀨尾健二, 廣瀨幸雄, 鄭世喜, 1987, '粒界腐植法による石油化學プレント用高溫機器の經年劣化評價法,'日本材料强度學會誌, 第22卷, 第3號, pp. 106-114

유효선, 정세희, 1996, '입계부식법에 의한 고온부재의 경년열화도 평가에 관한 연구 ,' 한국재료 학회지, 제6권, 제3호, pp. 253-263

한국표준과학연구원, 전북대학교, 1998, '입계부식법을 이용한 고온기기의 열화도 평가방법,' 특허 제138493호

김정기, 윤재영, 송기욱, 이주진, 정세희, 1991, '입계부식법에 의한 플랜트용 고온기기의 경년재질열화 평가에 관한 연구,' 대한기계학회논문집, 제15권, 제3호, pp. 898-906

JAERI-memo(62-193), 1987, 'SP Test Method,' Japan Atomic Energy Research Institute, pp. 1-135

Special Publication of National Aerospace Lab., 1992, 'SP / MSP Test Method for FGM Development SP-17,' Japan, pp. 1 - 79

Saito, M., Takahasi, H., Jeong, H. D., Kawasaki, A. and Watanabe, R., 1991, 'Evaluation of Fracture Toughness for Metal / Ceramics Composite Materials by Means of Miniaturized Specimen Technique,' Japan Soc. Mech. Eng., Vol. 57, No. 535, pp. 522-529

Hyo-Sun Yu, Eui-Gyun Na, and Se-Hi Chung, 1999, 'Assessment of Stress Corrosion Cracking Susceptibility By Small Punch Test,' Journal of Fatigue & Fracture of Engineering Materials & Structures, European Structural Integrity Society, Vol. 22, No 10, pp. 889-896 crossref(new window)