JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Assessment of Creep Properties of 9Cr Steel Using Small Punch Creep Testing
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Assessment of Creep Properties of 9Cr Steel Using Small Punch Creep Testing
Yun, Gi-Bong; Park, Tae-Gyu; Sim, Sang-Hun; Jeong, Il-Seok;
  PDF(new window)
 Abstract
Recently small punch creep testing (or miniature disc bend creep test) has received much attention through European collaborative research projects. This method was considered as a substitute for the conventional creep rupture testing by which the residual creep life is measured from the specimen taken out from serviced components of high temperature plants. It would be beneficial if the material creep properties such as power law creep constants as well as the creep rupture life can be measured from the small punch creep test. In this paper a method of assessing creep constants from the small punch creep testing is proposed. Finite element analyses were performed to investigate evolution of stress and strain rate at the weakest locations of the small punch creep specimen. Elastic-plastic-secondary creep analyses were carried out. The estimation equations for creep constants by the small punch creep testing are proposed based on the finite analysis results. Small punch creep tests were also performed with 9Cr steel and the accuracy of the proposed equation was verified by the experimental results.
 Keywords
Creep;Time-Dependent Fracture Mechanics;Small Punch Test;Power Law Creep;Miniature Specimen;
 Language
Korean
 Cited by
1.
Zr-2.5Nb 합금의 크리프 물성 측정을 위한 SP 크리프 시험의 적용성에 대한 연구,박태규;마영화;정일석;윤기봉;

대한기계학회논문집A, 2003. vol.27. 1, pp.94-101 crossref(new window)
2.
소형펀치 시험법을 이용한 Al 2024 ECAP 재료의 강도특성 평가,마영화;최정우;김선화;윤기봉;

대한기계학회논문집A, 2006. vol.30. 1, pp.8-17 crossref(new window)
3.
2024 Al 합금의 ECAP 공정에 따른 미세조직 변화와 강도특성,김선화;최용락;

한국재료학회지, 2006. vol.16. 1, pp.68-74 crossref(new window)
4.
ECAP 성형가공한 Al 2024 초미세결정립 재료의 소성변형량에 따른 강도 변화,최정우;마영화;윤기봉;

대한기계학회논문집A, 2005. vol.29. 10, pp.1407-1415 crossref(new window)
 References
1.
윤기봉, 1992, '고온 사용설비 파손방지 기술 개발,' 과학기술처 보고서, KRISS-92-88-IR

2.
한상인, 정세희, 윤기봉, 1997, '입계부식법에 의한 사용중인 화력발전소 요소의 잔여수명 평가', 대한기계학회논문집 A, 제21권, 제1호, pp. 22-31

3.
김효진, 정용근, 박종진, 2000, '발전소 고온부의 수명 평가를 위한 소형 시편용 크리프 시험기의 개발,' 대한기계학회논문집 A, 제24권, 제10호, pp. 2597-2602

4.
박태규, 윤기봉, 2000, '소형펀치 크리프 시험 에 대한 수치해석 및 설험연구(I),' 대한시셰학회 2000년도 제2회 재료 및 파괴부문 학술대회 논 문집, pp. 178 - 183

5.
Parker, J. D. and James, J. D., 1993, 'Disc-Bend Creep Deformation Behavior of 1/2Cr1/2Mo1/4V Low Alloy Steel,' Fifth International Conference on Creep and Fracture of Engineering Material and Structures, pp. 651-660

6.
Parker, J. D. and James, J. D., 1994, 'Creep Behavior of Miniature Disc Specimens of Low Alloy Steel,' ASME PVP, Vol. 279 Developments in a Progressing Technology pp. 167-172

7.
UIe, B., Sustar, T., Dobes, F. and Milicka, F., 1997, 'Small Punch Test Method Assessment for the Determination of the Residual Creep Life of Service Exposed Components: Outcomes from an lnterlaboratory Exercise,' Intelligent Software System in Inspection and Life Management of Power and Process Plants, pp. 263-276

8.
Tettamanti, S. and Crudeli, R., 1998, 'Small Punch Creep Test : A Promising Methodology for High Temperature Plant Components Life Evaluation,' BALTICA VI Plant Maintenance for Managing Life & Performance, Vol. 2, pp. 501-509

9.
Parker, J. D. and Stratford, G. C, 1998, 'The Application of Miniature Disc Testing for the Assessment of Creep Damage in CrMoV Rotor Steel,' BALTICA VI Plant Maintenance for Managing Life & Performance, Vol. 2, pp. 477-488

10.
Ule, B., Sustar, T., Dobes, F. and Milicka, F., 1999, 'Small Punch Test Method Assessment for the Determination of the Residual Creep Life of Service Exposed Components,' Technology, Law and Insurance, Vol. 4. pp. 283-293 crossref(new window)

11.
Li, W. and Rodgers, B., 1999, 'A Finite Element and Experimental Study of Punch and Bulge Testing,' Key Engineering Materials, Vol. 167-168, pp. 55-63

12.
Brookfield, D. J., Li, W. and Rodgers, B., 1999, 'Material Properties from Small Specimens Using the Punch and Bulge Test,' Journal of Strain Analysis, Vol. 34, No. 6, pp. 423-435 crossref(new window)

13.
Dobes, F., Milicka, K., 2000, 'Comparison of Creep Properties of Power Plant Pipe Bends after Long Term Exposure,' 26th MPA-Seminar, pp. 24.1-24.10

14.
박태규, 윤기봉, 장창희, 2001, '소형펀치 크리프 시험중 측정하는 변수에 대한 연구' (submitted to KSME)