Advanced SearchSearch Tips
Development of Simplified Finite Element Models for Welded Joints
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Simplified Finite Element Models for Welded Joints
Song, Seong-Il; Ahn, Sung Wook; Kim, Young Geul; Kim, Hyun-Gyu;
  PDF(new window)
In this paper, we develop simplified finite element (FE) models for butt-, lap- and T-welded joints by performing numerical and experimental experiments. Three-point bending tests of butt- and lap-welded specimens are performed to obtain the stiffness of the specimens and the strains at points near the welding beads. Similarly the stiffness and strains of T-welded specimen are measured by applying a point load at the end of the specimen. To develop simplified FE models, we consider the shape parameters of width, thickness and the angle of weld elements in the numerical simulations. The shape parameters of the simplified FE models are determined by building linear regression models for the experimental data sets.
Welded Joints;Butt Weld;Lap Weld;T-shape Weld;Finite Element Analysis;
 Cited by
Welding and weaving speed estimation using acceleration sensor based on SVM,;;;

한국마린엔지니어링학회지, 2017. vol.41. 10, pp.1018-1023 crossref(new window)
Numerical and experimental analysis of residual stresses in an arc welded lap joint and mapping of the residual stress field to a simplified finite element model, Journal of Mechanical Science and Technology, 2017, 31, 10, 4895  crossref(new windwow)
Zaman, I. and Rahman, R. A., 2006, "Application of dYnamic Correlation Technique and Model Updating on Truck Chassis," Proceeding of 1st Regional Conference on Vehicle Engineering and Technology, Putra World Trade Centre.

Niw, C. C. and Abu Bakar, A. R, 2007, "Finite Element Modeling of Arc Welded Joints," Jurnal Mekanikal, Vol. 23, pp. 15-30.

Vakili-Tahami, F. and Ziaei-Asl, A., 2013, "Numerical and Experimental Investigation of T-Shape Fillet Welding of AISI 304 Stainless Steel Plates," Materials and Design, Vol. 47, pp. 615-623. crossref(new window)

Xu, S. and Deng, X., 2004, "An Evaluation of Simplified Finite Element Models for Spot-Welded Joints," Finite Elements in Analysis and Design, Vol. 40, pp. 1175-1194. crossref(new window)

Goo, B. C., Choi, B. I. and Kim, J. H., 2004, "A Finite Element Analysis of the Stress Concentrations for Butt Welded Joints," International of Journal of Korean Welding and Joining Society, Vol. 22, pp. 59-64.