JOURNAL BROWSE
Search
Advanced SearchSearch Tips
An Experimental Investigation of the Effect of Corrosion on Dry Friction Noise
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
An Experimental Investigation of the Effect of Corrosion on Dry Friction Noise
Baek, Jongsu; Kang, Jaeyoung;
  PDF(new window)
 Abstract
This study investigates the friction noise characteristic in relation to the corrosion of metal by using the frictional reciprocating and pin-on-disk system. From the experiments, it is found that the corrosion of metal advances the onset time and increases the magnitude of friction noise. Further, it is observed that the effect of corrosion on friction noise stems from the alteration of tribo-surface during repetitive frictional motion. The alteration of the corrosive contact surface induces a negative friction-velocity slope, by which the corrosion of metal can generate dynamic instability faster than non-corrosion of metal.
 Keywords
Corrosion;Friction Noise;Tribo-Surface;Protective Layer;Wear Debris;Negative Slope;
 Language
Korean
 Cited by
 References
1.
Jibiki, T., Shima, M., Akita, H. and Tamura, M., 2001, "A Basic Study of Friction Noise Caused by Fretting," Wear, Vol. 251, pp. 1492-1503. crossref(new window)

2.
Chen, G. X. and Zhou, Z. R., 2007, "Time-frequency Analysis of Friction-induced Vibration Under Reciprocating Sliding Conditions," Wear, Vol. 262, No. 112, pp. 1-10. crossref(new window)

3.
Chen, G. X. and Zhou, Z. R. and Philippe, K. and Leo. V., 2002, "Effect of Surface Topography on Formation of Squeal Under Reciprocating Sliding," Wear, Vol. 253, pp. 411-423. crossref(new window)

4.
Meziane, A. and Baillet, L. and Laulgnet, B., 2010, "Experimental and Numerical Investigation on Friction-Induced Vibration of a Beam-on-Beam in Contact with Friction," Applied Acoustics, Vol. 71, pp. 843-853. crossref(new window)

5.
Choi, H., Kang, J., 2014, Characteristics of Friction Noise with Changes of the Natural Frequencies in the Reciprocating Motion, Vol.24, pp. 332-338. crossref(new window)

6.
Nam, J. and Kang, J., 2012, "A Basic Experimental Study on the Squeak Noise Using the Pin-on-disk," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 8, pp. 736-741. crossref(new window)

7.
Nam, J. and Kang, J., 2013, "Characteristics of Friction Noise with Respect to Friction Curve," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 23, No. 5, pp. 423-430. crossref(new window)

8.
Kang, J., 2014, "Investigation on Friction Noise in Beam Structure Under Mode-Coupling by Using Analytical Finite-Element Squeal Model," Trans. Korean Soc. Mech. Eng. A, Vol. 38, No. 5, pp. 545-550 crossref(new window)

9.
Baek, J. and Kang, J., 2015, "An Experimental Investigation of Dry Friction Noise for Several Metallic Materials," Trans. Korean Soc. Mech. Eng. A, Vol. 39, No. 7, pp. 681-686 crossref(new window)

10.
Grzesik, W., Zalisz, Z. and Nieslony, P., 2002, "Friction and Wear Testing of Multilayer Coatings on Carbide Substrates for Dry Machining Applications," Surface and Coatings Technology, Vol. 155, pp. 37-45 crossref(new window)

11.
Lee, H., 2005, Friction Wear Engineering, Taeilsa, Dae Gu, pp.95-117.