Advanced SearchSearch Tips
Finite Element Analysis of a Customized Eyeglass Frame Fabricated by 3D Printing
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Finite Element Analysis of a Customized Eyeglass Frame Fabricated by 3D Printing
Lee, Ji-Eun; Im, Young-Eun; Park, Keun;
  PDF(new window)
In recent years, 3D printing has received increasing attention due to releases of low-cost 3D printers based on open-source platform. 3D printing is expected to reduce the barrier to entry in the traditional manufacturing processes by increasing flexibility and creating an advantage to manufacture customized products at low costs. In this study, a unique eyeglass frame was designed to have a snake shape, which has an asymmetric geometry unlike traditional frames. The eyeglass frame was designed in a customized manner by reflecting dimensional characteristics of a customer`s face. Finite element analysis was performed to investigate the structural safety of the 3D printed frames during the assembly process. The analysis also considered the effect of anisotropic material properties as determined by tensile tests. The eyeglass frame was then printed using the customized sizes and the best building process. The eyeglass frame was successfully assembled with lenses and without structural failure during its assembly procedure.
3D Printing;Customized Product;Finite Element Analysis;Orthotropic Anisotropy;
 Cited by
발전소 저탄장에 적용되는 풀코드스위치 부품의 구조최적화 3D 프린팅 제작기술 개발,이혜진;

한국산학기술학회논문지, 2016. vol.17. 10, pp.319-330 crossref(new window)
금속 3D 프린팅 소재와 폴리머 레이저접합에 관한 연구,예강현;김성욱;박거동;최해운;

Journal of Welding and Joining, 2016. vol.34. 4, pp.23-27 crossref(new window)
Ahn, D. G. and Yang, D. Y., 2005, "Principle of Rapid Prototyping and Its Trends," J. KSPE, Vol. 22, No. 10, pp. 7-16.

Campbell, I., Bourell, D. and Gibson, I., 2012, "Additive Manufacturing: Rapid Prototyping Comes of Age," Rapid Prototyping J., Vol. 18, No. 4, pp. 255-258. crossref(new window)

Park, S. H., Park, J. H., Lee, H. J. and Lee, N. K., 2014, "Current Status of Biomedical Applications Using 3D Printing Technology," J. KSPE, Vol. 31, No. 12, pp. 1067-1076. crossref(new window)

Park, J. H., Jang, J. and Cho, D. W., 2014, "Three-Dimensional Printed 3D Structure for Tissue Engineering," Trans. Korean Soc. Mech. Eng. B, Vol. 38, No. 10, pp. 817-829.

Vatani, M., Lu, Y., Lee, K. S., Kim, H. C. and Choi, J. W., 2013, "Direct-Write Stretchable Sensors Using Single-Walled Carbon Nanotube/Polymer Matrix," J. Electro. Packag., Vol. 135, No. 1, 011009. crossref(new window)

Oh, S. T., Jang, S. H., Lee, I. H., Kim, H. C. and Cho, H. Y., 2014, "3-Dimensional Circuit Device Fabrication for Improved Design Freedom Based on the Additive Manufacturing," J. KSPE, Vol. 31, No. 12, pp. 1077-1083. crossref(new window)

Ahn, D. G., 2011, "Applications of Laser Assisted Metal Rapid Tooling Process to Manufacture of Molding & Forming Tools-State of the Art," Int. J. Precis. Eng. Manuf., Vol. 12, No. 5, pp. 925-938. crossref(new window)

Kim, J. H. and Jung, E. C., 2015, "Modeling Process Development for Customized Woman Midsole Design Based-on 3d Printing Technology," J. Kor. Soc. Design Forum, Vol. 46, pp. 267-277.

Pilipovic, A., Raos, P. and Sercer, M., 2009, "Experi-Mental Analysis of Properties of Materials for Rapid Prototyping," Int. J. Adv. Manuf. Technol., Vol. 40, pp. 105-115. crossref(new window)

Ahn, S. H., Montero, M., Odell, D., Roundy, S. and Wright, P. K., 2002, "Anisotropic Material Properties of Fused Deposition Modeling ABS," Rapid Prototyping J., Vol. 8, No. 4, 248-257. crossref(new window)

Caulfield, B., McHugh, P. E. and Lohfeld, S., 2007, "Dependence of Mechanical Properties of Polyamide Components on Build Parameters in the SLS Process," J. Mater. Process. Technol., Vol. 182, No. 1, pp. 477-488. crossref(new window)

Quintana, R., Choi, J. W., Puebla, K. and Wicker, R., 2010, "Effects of Build Orientation on Tensile Strength for Stereolithography-Manufactured ASTM D-638 Type I Specimens," Int. J. Adv. Manuf. Technol., Vol. 46, No. 1-4, pp. 201-215. crossref(new window)

Park, K., Kim, Y. S. and Park, D. Y., 2008, "Investigation into Directional Properties of Rapid Prototypes and Its Application to FE Analysis Considering Anisotropy," J of KSPE, Vol. 25, No. 11, pp.126-133.

Lee, J. E., Lim, Y. E., Kim, S. Y., Yu, H. R., Jin, M. H., Kong, W. J., Bae, H. Y. and Park, K., 2014, "Development of Personalized Glasses Using 3D Printing with Evaluation of Assembly Characteristics," Proc. KSME Fall Conf., Gwangju, Korea.