Advanced SearchSearch Tips
3D Finite Element Simulation of Pellet-Cladding Mechanical Interaction
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
3D Finite Element Simulation of Pellet-Cladding Mechanical Interaction
Seo, Sang Kyu; Lee, Sung Uk; Lee, Eun Ho; Yang, Dong Yol; Kim, Hyo Chan; Yang, Yong Sik;
  PDF(new window)
In a nuclear power plant, the fuel assembly, which is composed of fuel rods, burns, and the high temperature can generate power. The fuel rod consists of pellets and a cladding that covers the pellets. It is important to understand the pellet-cladding mechanical interaction with regard to nuclear safety. This paper proposes simulation of the PCMI. The gap between the pellets and the cladding, and the contact pressure are very important for conducting thermal analysis. Since the gap conductance is not known, it has to be determined by a suitable method. This paper suggests a solution. In this study, finite element (FE) contact analysis is conducted considering thermal expansion of the pellets. As the contact causes plastic deformation, this aspect is considered in the analysis. A 3D FE module is developed to analyze the PCMI using FORTRAN 90. The plastic deformation due to the contact between the pellets and the cladding is the major physical phenomenon. The simple analytical solution of a cylinder is proposed and compared with the fuel rod performance code results.
Nuclear Fuel Rod;Pellet to Cladding Mechanical Interaction;Finite Element Analysis;Thermo-Mechanical Analysis;Gap Conductance;Contact;Elasto Plastic Deformation;
 Cited by
Struzik, C., Moyne, M. and Piron, J.P., 1997, High Burn-up Modelling of UO2 and MOX Fuel with METEOR / TRANSURANUS version 1.5, ANS International Topical Meeting on Light Water Reactor Fuel.

Brochard, J., Bentejac, F. and Hourdequin, N., 1997. Non-linear Finite Element Studies of the Pellet Cladding Mechanical Interface in PWR Fuel. In: Transactions of the 14th SMIRT, Lyon, France (TOUTATIS an Application of the CAST3M Finite Element Code for PCI Three Dimensional Modelling).

Thouvenin, G., Ricaud, J. M. and Michel, B., 2006. ALCYONE: the PLEIADES Fuel Performance Code Dedicated to Multidimensional PWR Studies. In: International Meeting on LWR Fuel Performance, Spain.

Hikimet, S. A. and Ortego, P., 2005, "A Review of Nuclear Fuel Performance Codes," Progress in Nuclear Energy, Vol. 46, No. 2, pp. 127-141. crossref(new window)

Suzuki, M., 2000, Light Water Reactor Fuel Analaysis Code FEMAXI-V, JAERI-DATA/Code 2000-030.

Kennard, E. J., 1938, "Kinetic Theory of Gases," McGraw-Hill.

Ross, A.M. and Stoute, R.L., 1962, "Heat Transfer Coefficient Between UO2 and Zircaloy-2," Atomic Energy of Canada, Technical Report, ACEL-1552.

Geelhood, K. J., Luscher, W. G. and Cuta, J. M., 2011, FRAPTRAN 1.4: a Computer Code for the TRansient Analysis of Oxide Fuel Rods, Technical Report NUREG/CR-7023, Vol. 1, US Nuclear Regulatory Commission.

Wriggers, P., 2006, "Computational Contact Mechanics, second edition".

Belytschoko, T., Liu, W. K. and Moran, B., 2000, "Nonlinear Finite Elements for Continua and Structures".

Simo, J. C. and Taylor, R. L., 1985, "Consistent Tangent Operators for Rate Independent Elastoplasticity," Computer Methods in Applied Mechanics and Engineering, 48, 101-119. crossref(new window)

Parsons, B. and Wilson, E. A., 1970, "A Method for Determining the Surface Contact Stresses Resulting from Interference Fits," ASME, Journal of Engineering for Industry, pp. 208-218.

Gao, X.-L., 2003, "Elasto-plastic Analysis of an Internally Pressurized Thick-walled Cylinder Using an Strain Gradient Plasticity Theory," International Journal of Solids and Structures, pp. 6445-6455.

Suzuki, M., 2000, "Light Water Reactor Fuel Analysis Code FEMAXI-V(VER.1)," JAERI-Data/Code.