JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Three-dimensional flow within a film-cooling hole normally oriented to the main flow
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Three-dimensional flow within a film-cooling hole normally oriented to the main flow
Lee, Sang-U; Ju, Seong-Guk;
  PDF(new window)
 Abstract
Three-dimensional flow within a film-cooling hole, which is normally oriented to the main flow, has been measured by using a straight five-hole probe for the blowing ratios of 1.0 and 2.0. The length-to-diameter ratio of the injection hole is fixed to be 1.0 throughout the whole experiments. The result shows that the secondary flow within the hole is strongly affected by the main flow and flow separation at the hole inlet. The higher blowing ratio provides less influence of the main flow on the injectant flow. The three-dimensional flow at the hole exit is considerably altered due to the strong interaction between the injectant and main flow. The aerodynamic loss produced inside the injection hole is mainly attributed to the inlet flow separation.
 Keywords
Gas Turbine;Film-Cooling Hole;Total Pressure Loss;Three-Dimensional Flow;
 Language
Korean
 Cited by
 References
1.
ASME Journal of Fluids Engineering, 1982. vol.104. pp.493-499

2.
ASME Journal of Engineering for Gas Turbine and Power, 1990. vol.112. pp.73-93

3.
ASME Journal of Turbomachinery, 1994. vol.116. pp.358-368

4.
ASME Journal of Turbomachinery, 1994. vol.116. pp.97-105

5.
To appear in ASME Journal of Turbomachinery, 1995.

6.
international Organization for Standardization, 1991.

7.
ISA Transactions, 1979. vol.18. pp.23-34

8.
대한기계학회논문집, 1996. vol.20. pp.2693-2706

9.
ASME Journal of Fluids Engineering, 1985. vol.107. pp.161-164

10.
ASME Journal of Turbomachinery, 1995. vol.117. pp.440-450