JOURNAL BROWSE
Search
Advanced SearchSearch Tips
축류회전차 익말단 틈새유동에 대한 수치해석
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
축류회전차 익말단 틈새유동에 대한 수치해석
No, Su-Hyeok; Jo, Gang-Rae;
  PDF(new window)
 Abstract
The substantial loss behind axial flow rotor was generated by wake, various vortices in the hub region and the leakage vortex in the tip region. Particularly, the leakage vortex formed near blade tip was one of the main causes of the reduction of performance, the generation of noise and the aerodynamic vibration in rotor downstream. In this study, the three-dimensional flowfields in an axial flow rotor for various tip clearances were calculated, and the numerical results were compared with the experimental ones. The numerical technique was based on SIMPLE algorithm using standard k-.epsilon. model (WFM). Through calculations, the effects of the tip clearance on the overall performance of rotor and the loss distributions, and the increase in the displacement, momentum, and blade-force-deficit thickness of the casing wall boundary layer were investigated. The mass-averaged flow variables behind rotor agreed well with the experimental results. The presence of the tip leakage vortex behind rotor was described well. Although the loci of leakage vortex by calculation showed some differences compared with the experimental results, its behavior for various tip clearances was clarified by examining the loci of vortex center.
 Keywords
Tip Clearance;Leakage Vortex;SIMPLE Algorithm;Standard k-;Loci of Vortex Center;
 Language
Korean
 Cited by
1.
펌프·송풍기의 설계와 유동현황,조강래;

한국유체기계학회 논문집, 2002. vol.5. 4, pp.71-81 crossref(new window)
2.
축류회전차에서 팁간극의 변화를 고려한 유동특성에 관한 연구,이명호;

한국마린엔지니어링학회지, 2002. vol.26. 3, pp.353-361
3.
축류압축기 익렬에서의 역류 유동 특성에 대한 수치적 연구,손창현;;

대한기계학회논문집B, 2000. vol.24. 5, pp.615-622 crossref(new window)
4.
천음속 회전익에서의 누설유동,박준영;정희택;백제현;

대한기계학회논문집B, 2003. vol.27. 1, pp.84-94 crossref(new window)
5.
유량에 따른 축류홴의 익단누설와류 및 후류 특성,김광용;장춘만;

대한기계학회논문집B, 2005. vol.29. 3, pp.322-329 crossref(new window)
 References
1.
ASME J. of Engineering for Power, 1982. vol.104. pp.760-771

2.
ASME J. of Engineering for Power, 1982. vol.104. pp.772-781

3.
ASME J. of Engineering for Power, 1986. vol.108. pp.7-14

4.
ASME J. of Turbomachinery, 1989. vol.111. pp.250-256

5.
The 2nd DSME-JSME Fluids Engineering Conference, 1990. vol.2. pp.81-85

6.
FLOMEKO 93, 1993. vol.2. pp.629-636

7.
J. of Engineering for Gas Turbines and Power, 1986. vol.108. pp.15-21

8.
ASME J. of Turbomachinery, 1993. vol.115. pp.453-467

9.
ASME J. of Turbomachinery, 1996. vol.118. pp.230-239

10.
대한기계학회 '94년도 추계학술대회논문집(II), 1994. pp.515-519

11.
대한기계학회논문집(B), 1997. vol.21. 7, pp.911-918

12.
대한기계학회논문집(B), 1996. vol.20. 10, pp.3272-3281

13.
Numerical Heat Transfer and Fluid Flow, 0000.

14.
Ph. D Thesis, University of London, 1985.

15.
연세대학교 기계공학과 박사학위논문, 1988.

16.
ASME J. of Turbomachinery, 1991. vol.113. pp.260-271

17.
ASME J. of Basic Engineering, 1970. pp.467-482

18.
ASME J. of Engineering for Power, 1982. vol.104. pp.805-818