JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Measurements of Temperature Field and Film-Cooling Effectiveness for a Shower-Head Film Cooling
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Measurements of Temperature Field and Film-Cooling Effectiveness for a Shower-Head Film Cooling
Jeong, Chul-Hee; Lee, Sang-Woo;
  PDF(new window)
 Abstract
Measurements of temperature fields and film-cooling effectiveness have been conducted for a shower-head film cooling on the leading edge of a blunt body, which simulates a first-stage turbine stator. In this study, three injection cases are employed for an average blowing ratio based on freestream velocity, M, of 0.5, 1.0 and 1.5. Two (Case 1), four (Case 2) and six (Case 3) rows of normal holes are symmetrically drilled on the three tested circular-cylinder leading edges. The measurements show that regardless of M, the film-cooling effectiveness increases as the injection row is situated at farther downstream location. In Case 1, the film-cooling effectiveness is highest for M = 0.5 and lowest for M = 1.5. On the contrary, in Case 3, the film-cooling effectiveness is highest for M = 1.0 and lowest for M = 0.5. When M = 0.5, the film coverage by the first row of the injection holes deteriorates as the number of the injection row increases. In particular, the film-cooling effectiveness due to the injection through the first row of the holes in Case 3, has a nearly zero value.
 Keywords
Shower-Head Film Cooling;Turbine-Blade Leading Edge;Temperature Field;Film-Cooling Effectiveness;
 Language
Korean
 Cited by
 References
1.
Goldstein, R.J., 1971, 'Film Cooling,' Advances in Heat Transfer, edited by T. Irvine and J.P. Hartnett, Academic Press, New York, Vol. 7, pp. 272-328

2.
Lee, S. W., Lee, J. S. and Ro, S. T., 1994, 'Experimental Study on the Flow Characteristics of Streamwise Inclined Jets in Crossflow on Flat Plate,' ASME Journal of Turbomachinery, Vol. 116, pp. 97-105

3.
Mehendale, A. B., and Han, J. C., 1992, 'Influence of high Mainstream Turbulence on Leading Edge Film Cooling Heat Transfer, 'ASME Journal of Turbomachinery, Vol. 114, pp. 707-715

4.
Takeishi, K., Aoki, S., Sato, T, and Tsukagoshi, K., 1992, 'Film Cooling on a Gas Turbine Rotor Blade,' ASME Journal of Turbomachinery, Vol. 114, pp. 828-834

5.
Funazaki, K., 1996, 'Studies an Wake-Affected Heat Transfer Around the Circular leading Edge of Blunt Body,' ASME Journal of Turbomachinery, Vol. 118, pp. 452-460

6.
Funazaki, K., Yokota, M., and Yamawaki, S., 1997, 'The Effect of Perodic Wake Passing on Film Effectiveness of Discrete Cooling Holes Around the Leading Edge of a Blunt Body,' ASME Journal of Turbomachinery, Vol. 119, pp. 292-301

7.
정철희, 이상우, 1999, '터빈 블레이드 선단에서의 샤워헤드 막냉각 - 국소분사율 측정 및 유동의 가시화 -,' 대한기계학회논문집(B), 제 23 권, 제 3 호, pp. 419-430

8.
ISO 5167-1:1991(E), 1991, 'Measurement of Fluid Flow by Means of Pressure Differential Devices - Part 1: Orifice Plates, Nozzles and Venturi Tubes Inserted in Circular Cross-Section Conduits Running Full,' International Organization for Standardization

9.
STP 470A, 1974, Manual on the Use of Thermocouples in Temperature Measurement, published by ASTM

10.
Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, 'ASME Measurement Uncertainty,' ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164