JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effect of Injection Pressure on Atomization Characteristics of Fuel Spray in High-Pressure Gasoline Injector
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effect of Injection Pressure on Atomization Characteristics of Fuel Spray in High-Pressure Gasoline Injector
Lee, Chang-Sik; Choi, Soo-Chon; Kim, Min-Kyu; Kwon, Sang-Il;
  PDF(new window)
 Abstract
This paper describes the macroscopic behavior and atomization characteristics of the high-pressure gasoline injector in direct-injection gasoline engine. The global spray behavior of fuel injector was visualized by shadowgraph technique. The atomization characteristics of gasoline spray such as mean diameter and mean velocity of droplet were measured by the phase Doppler particle analyzer system. In order to obtain the influence of fuel injection pressure, the macroscopic visualization and experiment of particle measurement on the fuel spray were investigated at 3,5 and 7 MPa of injection pressure under different surrounding pressure in the spray chamber. The results of this work show that the fuel injection pressure of gasoline injector in GDl engine has influence upon the mean droplet diameter, mean velocity of spray droplet, the spray tip penetration, and spray width under the elevated ambient pressure.
 Keywords
Fuel Atomization;Spray Characteristics;Gasoline Injector;Mean Droplet Diameter;
 Language
Korean
 Cited by
 References
1.
Zhao, F. Q., Lai, M. C., and Harrington, D. L., 1995, ' The Spray Characteristics of Automotive Port Fuel Injection-A Critical Review,' SAE Paper 950506

2.
Zhao, F. Q., Lai M. C, and Harrington, D. L., 1997, ' A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engines ,' SAE Paper 970627

3.
Lee, C. S., Lee, K. H., Chon, M. S., Kim, Y. H., Park, J. S., and Cho, N. H., 1998, 'A Study on the Spray Structure of High Pressure Gasoline Injection,' The 3th Conference of ILASS-Asia, pp.37 -42

4.
Iwamoto, Y, Noma, K., Nakayama, O., Yamaguchi, T., and Ando, H., 1997, 'Development of Gasoline direct. Injection Engine,' SAE paper 970514

5.
Dodge, L. G., 1996, 'Fuel Preparation requirements for direct-injection spark ignition Engine,' SAE paper No. 962015

6.
Lee, C F., and Bracco, F. V: 1994, 'Initial comparisons of Computed and Measured Hollow-cone Sprays in an Engine,' SAE paper, 940398

7.
Zhao, F. Q., Yoo, J. H., Liu, Y, and Lai, M. C., 1996, 'Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines,' SAE Paper 961925

8.
Lee, C. S., Lee, K. H., Chon, M. S., and Kim, Y H., 1999, 'A Study on Spray Structure of Gasoline Fuel Injector,' IPC-10 Proceedings, No. 99049, pp. 309-310