Advanced SearchSearch Tips
Sensitivity Analysis on Off-Design Performance of Centrifugal Compressor Due to the Parameters of Two-zone Model and TEIS Model
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Sensitivity Analysis on Off-Design Performance of Centrifugal Compressor Due to the Parameters of Two-zone Model and TEIS Model
Yoon, Sung-Ho; Baek, Je-Hyun;
  PDF(new window)
In this study, an off-design performance analysis procedure is developed based on Two-zone model and TEIS model. In Two-zone model, there are both primary zone and secondary zone for an isentropic core flow and an average of all non-isentropic streamtubes respectively. The level of the core flow diffusion in an impeller is calculated by using TEIS model which regards the impeller as two successive rotating elements in series. At impeller exit, the mixing process occurs with an increase in entropy, that is to say, a decrease in total pressure. In loss models including Two-zone and TEIS model, some empirical parameters have a great influence on overall performance curve. So these parameters' influences on the overall performance curve are investigated and compared with experimental data
Centrifugal Compressor;Off-Design Performance Analysis;Two-zone Model;TEIS Model;Loss Model;Sensitivity;Parameter Study;
 Cited by
A Sensitivity Analysis of Centrifugal Compressors Empirical Models,Baek, Je-Hyun;Sungho Yoon;

Journal of Mechanical Science and Technology, 2001. vol.15. 9, pp.1292-1301
현장에서 운전중인 터보냉동기의 성능 측정과 전력 소비량 예측,장영수;신영기;김영일;백영진;

대한기계학회논문집B, 2001. vol.25. 12, pp.1730-1738 crossref(new window)
Galvas, M. R., 1973, 'FORTRAN Program for ?Predicting Off-Design Performance of Centrifugal Compressors,' NASA TN D-7487

오형우,윤의수,정명균,1997,'원심 압축기의 성능 예측 및 손실 해석,' 대한 기계학회 논문집 제21권 제6호,pp.804-812

Eckardt, D., 1976, 'Detailed Flow Investigation Within a High Speed Centrifugal Compressor Impeller,' ASME Journal of Fluids Engineering, Vol. 98, pp. 390 - 402

Eckardt D., 1980, 'Flow Field Analysis of Radial and Backswept Centrifugal Compressor Impellers - Part 2 ; Flow Measurements using a Laser Velocitimeters,' 25th ASME Gas Turbine Conference, pp. 77 - 86

Japikse, D, 1985, 'Assessment of Single- and Two-Zone Modeling of Centrifugal Compressors. Studies in Component Performance ; Part 3,' ASME 85·GT-73

Japikse, D., 1996, 'Centrifugal Compressor Design and Performance,' Concepts ETI

Wiesner F. J. 1967, 'A Review of Slip Factors for Centrifugal Impellers,' Trans. ASME Journ. of Eng. Power, pp. 558-572

Daily J. W, Nece R. E., 1960, 'Chamber dimension effects on induced flow and frictional resistance of enclosed rotating disks,' ASME No. 59-HYD-9, Trans. ASME Journ. Basic Eng., pp. 217-232

Stanitz, 1952, 'One-dimensional Compressible Flow in Vaneless Diffusers of Radial and Mixed Flow Centrifugal Compressors Including Effects of Friction, Heat Transfer and Area Change,' NASA TN-2610

Oh JongSik, 1998, 'Numerical Investigation of Slip factor for Centrifugal Impellers,' Proc. of 4th KSME-JSME Fluid Eng. Conf., pp. 113 - 116

최영석,심재혁,강신혁,1998,'두영역 모델을 사용한 원심펌프의 성능예측,' 1998 유체기계 연구개발 발표회 논문집,pp.33-41

조성국,강신형,1998,'소형 원심 압축기의 성능평가에 대한 실험적 연구,' 대한기계학회 논문집, 제22권 8호,pp.1052-1063

윤성호,백제현,1999,'깃 없는 디퓨저를 포함한 원심 압축기의 탈설계 해석,' 대한기계학회 추계학술대회,pp.494-499