Advanced SearchSearch Tips
Characteristics of Spray from Pressure-Swirl Nozzle with Different Liquid Properties and Nozzle Geometries
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Characteristics of Spray from Pressure-Swirl Nozzle with Different Liquid Properties and Nozzle Geometries
Choe, Yun-Cheol; Jeong, Ji-Won; Kim, Deok-Jul;
  PDF(new window)
The purpose of this study was to investigate the significant characteristics in atomization process of industrial etching spray fur the design or Precise pressure-swirl nozzles. The experiment was carried out with different viscosities and densities of the liquid. The macro characteristics of liquid spray, such as the spray angle and breakup process were captured by PMAS and the micro characteristics of liquid spray. such as droplet size and velocity measurements were obtained by PDA. The droplet axial and radial velocity and SMD were measured along axial and radial direction. The RMS of two velocities was measured along radial direction. It was found that the fluid with higher kinematic viscosity resulted in the larger SMD and the lower mean droplet velocity. And we could divide breakup processes into three regions that is atomization, non-dilution and dilution one in spray of pressure-swirl nozzle. The radial as well as axial velocity of droplet played an important role in the atomization process of higher kinematic viscosity fluid.
Liquid Atomization;Phase Doppler Anemometer;Pressure-Swirl Nozzle;SMD;Breakup Process;Paticle Motion Analysis System;
 Cited by
An Experimental Study on the Spray Characteristics of a Dual-Orifice Type Swirl Injector at Low Fuel Temperatures,;;;;

Journal of Mechanical Science and Technology, 2004. vol.18. 7, pp.1187-1195
습식 에칭공정에서 노즐 형상에 따른 분무특성 분석을 통한 에칭특성의 향상에 관한 연구,정지원;김덕줄;

대한기계학회논문집B, 2004. vol.28. 7, pp.842-849 crossref(new window)
Experimental Study on Spray Etching Process In Micro Fabrication of Lead Frame,;;;

Journal of Mechanical Science and Technology, 2004. vol.18. 12, pp.2294-2302
미세 가공 시스템에서 분무특성이 에칭특성에 미치는 영향에 관한 연구,정지원;김덕줄;

대한기계학회논문집B, 2004. vol.28. 1, pp.109-117 crossref(new window)
Lead-Frame 에칭공정에서 몬테카를로 시뮬레이션을 이용한 에칭특성 예측,정흥철;최경민;김덕줄;

한국정밀공학회지, 2006. vol.23. 1, pp.72-79
Lead-Frame 에칭공정에서 분무특성을 이용한 에칭특성의 예측,정흥철;최경민;김덕줄;

대한기계학회논문집B, 2006. vol.30. 4, pp.381-388 crossref(new window)
산업용 에칭노즐을 이용한 Invar합금판의 식각에 분사각과 압력이 미치는 영향,정흥철;김동욱;최경민;김덕줄;

한국정밀공학회지, 2006. vol.23. 8, pp.47-53
공작기계용 HP Holder 분사노즐 유동특성에 관한 수치해석,이중섭;윤지훈;정인국;송철기;서정세;

대한기계학회논문집B, 2011. vol.35. 10, pp.1061-1066 crossref(new window)
Bates, C. J and Jolly, A. J' 1997, 'Phase Dopper Measurement on a Pressurised Spray Nozzle Using Scattering Angles of $72^{\circ}\;and\;150^{\circ}$,' IC'LASS-97, pp. 910-917

최동석, 김덕줄, 고장권, 1998, '와류형 고압인 젝터의 초기분무의 분열과도 현상,' 대한기계학회논문집(B), 제22권, 제8호, pp. 1132-1140

(3) Evers, L. W., 1994, 'Characteristics of the Transient Spray from a High Pressure Swirl Injector,' SAE Paper, No. 940188

Zhao, F., Yoo, J., Liu, Y. and Lai, M., 1997, 'Characteristics of Gasoline Direct Injection Spray,' ILASS-America., pp. 514-521

Zhao, F., Yoo, J., Liu, Y. and Lai, M., 1996, 'Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines,' SAE Paper, No. 961925

Dombrowski, N. and Hasson, D., 1969, 'The Flow Characteristics of Swirl Spray Pressure Nozzles with Viscosity Liquid,' AIChE Journal, pp. 604 - 611

송시홍, 이상용, 1994, 'Y-Jet노즐을 통한 저점도 액체의 유량 및 입경예측에 관한 연구,' 대한기계학회눈문집(B), 제12호, pp. 3377-3385

이상용, 김인구, 조한권, 1989, '와류 분무 노즐에 의해 형성되는 액적들의 균일도에 액체의 점도가 미치는 영향,' 대한기계학회눈문집(B), 제3호, , pp. 538-546

Tasi, S.C. and Viers, B., 1992, 'Airblast Atomization of Viscous Newtonian Liquids using Twin-fluid Jet Atomizers of Various Designs,' Trans, ASME Journal, Fluids Engineering, Vol, 114, pp. 113-118

정지원, 차건종, 김덕줄, 2000, '이중분무의 중첩영역과 단일분무에서 액적의 거동 특성,' 대한기계학회논문집(B), 제24권, 제10호, pp. 1300-1380