JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effect of Pulsations on Flow and Heat Transfer Characteristics of an Impinging Jet
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effect of Pulsations on Flow and Heat Transfer Characteristics of an Impinging Jet
Lee, Eun-Hyeon; Lee, Seong-Hyeok; Lee, Jun-Sik;
  PDF(new window)
 Abstract
Experiments are carried out to investigate the effect of pulsations on the flow and heat transfer characteristics of an axisymmetric impinging jet on a flat plate heated by using a gold coated aim. Vertex motion in the impinging jet is visualized using a fog generator, and a thermochromatic liquid crystal (TLC) technique is used to measure the time averaged local temperature distributions on the impingement plate. In addition, the quantitative data for mean velocity and turbulence intensity are obtained employing hot-wire anemometer. Parameters such as pulsating frequency (f = 0, 10 and 20 Hz) and the nozzle-to-palate spacing (H/D = 2, 10) are considered at the jet Reynolds number of 20,000. Consequently, the significant changes of flow structure and local Nusselt number distribution due to pulsations are observed. In the case of H/D = 2, the enhanced heat transfer coefficient exceeding 30 % is observed at the stagnation point. At the high H/D, heat transfer rate increases with pulsation frequency.
 Keywords
Pulsation;Impinging Jet;Heat Transfer;Liquid Crystal;
 Language
Korean
 Cited by
 References
1.
Hoogendorrn, C.J., 1977, 'The Effect of Turbulence on Heat Transfer at a Stagnation Point,' International Journal of Heat and Mass Transfer, Vol. 20, pp.1333-1338 crossref(new window)

2.
Kataoka, K., Suguro, M., Degawa, H., Maruo, K. and Mihata, I., 1987, 'The Effect of Surface Renewal Due to Large-Scale Eddies on Jet Impingement Heat Transfer,' International Journal of Heat and Mass Transfer, Vol. 30, pp.559-567 crossref(new window)

3.
Liu, T. and Sullivan, J.P., 1996, 'Heat Transfer and Flow Structures in an Excited Circular Impinging jet,' International Journal of Heat and Mass Transfer, Vol. 39, No. 17, pp. 3695-3706 crossref(new window)

4.
Azevedo, L.F.A., Webb, B.W. and Queiroz, M., 1994, 'Pulsed Air Jet Impingement Heat Transfer,' Experimental Thermal and Fluid Science, Vol. 8, pp. 206-213 crossref(new window)

5.
Mladin, E.C. and Zumbrunnen, D.A., 1995, 'Dependence of Heat Transfer to a Pulsating Stagnation Flow on Pulse Characteristics,' Journal of Thermophysics and Heat Transfer, Vol. 9, No.1, pp. 181-192

6.
Sheriff, H. S. and Zumbrunnen, D. A., 1974, 'Effect of Flow Pulsations on the Cooling Effectiveness of an Impinging Jet,' ASME Journal of Heat Transfer, Vol. 111, pp. 889-896

7.
Zumbrunnen, D. A. and Aziz, M., 1993, 'Convective Heat Transfer Enhancement Due to Intermittency in an Impinging Jet,' ASME Journal of Heat Transfer, Vol. 115, pp. 91-98

8.
Mladin, E.C. and Zumbrunnen, D.A., 1997, 'Local Convective Heat Transfer to Submerged Pulsating Jets,' International Journal of Heat and Mass Transfer, Vol. 40, No. 14, pp. 3305-3321 crossref(new window)

9.
Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 crossref(new window)

10.
Camci, C; Kim K. and Hippensteele, S.A, 1992, 'A New Hue Capturing Technique for the Quantitative Interpretation of Liquid Crystal Images Used in Convective Heat Transfer Studies,' ASME Journal of Heat Transfer, Vol. 114, pp. 765-775

11.
Farina, D.J., Hacker, J.M., Moffat, R.J. and Eaton, J.K., 1994, 'Illuminant Invariant Calibration of Thermochromic Liquid Crystals,' Experimental Thermal and Fluid Science, Vol. 9, pp. 1-12 crossref(new window)

12.
Baughn, J.W., 1995, 'Liquid Crystal Methods for Studying Turbulent Heat Transfer,' International Journal of Heat and Fluid Flow, Vol. 16, Issue 5, pp. 365-375 crossref(new window)

13.
Colucci, D.W. and Viskanta, R., 1996, 'Effect of Nozzle Geometry on Local Convective Heat Transfer to a Confined Impinging Air Jet,' Experimental Thermal and Fluid Science, Vol. 13, pp. 71-80 crossref(new window)

14.
Gardon, R and Akfirat, J. C., 1965, 'The Role of Turbulence in Determining the Heat Transfer Characteristics of Impinging Jets,' International Journal of Heat and Mass Transfer, Vol. 8, pp. 1261-1272 crossref(new window)

15.
Kunio Kataoka, 1990, 'Impingement Heat Transfer Augmentation Due to Large Scales Eddies,' Heat Transfer 1990, pp. 255-273

16.
Jambunathan K, Lai, E., Moss, M.A. and Button, B.L., 1992, 'A Review of Heat Transfer Data for Single Circular Jet Impingement,' International Journal of Heat and Fluid Flows, Vol. 13, No.2, pp.106-115 crossref(new window)

17.
Hoogendoom, C.J., 1977, 'The Effect of Turbulence on Heat Transfer at a Stagnation Point,' International Journal of Heat and Mass Transfer, Vol. 20, pp. 1333-1338 crossref(new window)

18.
Huber, A.M. and Viskanta, R, 1994, 'Heat transfer to a Confined Impinging Array of Air Jets with Spent Air Exits,' ASME Journal of Heat Transfer, Vol. 116, pp. 570-576

19.
Lytle, D. and Webb, B.W., 1991, 'Secondary Heat Transfer Maxima for Air Jet Impingement at Low Nozzle-to-Plate Spacings,' in Experimental Heat Transfer, Fluid Mechanics, and Thermudynamics, I.E Keffer, RK Shah and E.N. Ganic, Eds., pp.776-783, Elsevier, New York

20.
Popiel, C.O. and Boguslawski, L., 1988, 'Effect of Flow Structure on the heat or mass transfer on a Flat plate in Impinging Round jet,' 2nd UK National Conf. on Heat Transfer, University of Strathclyde, UK, September 14-16, Vol. 1 pp. 663-685

21.
Kataoka, K Suguro, M., Degawa, H., Maruo, K and Mihata, I., 1987, 'The Effect of Surface Renewal Due to Large-Scale Eddies on Jet Impingement Heat Transfer,' International Journal of Heat and Mass Transfer, Vol. 30, No. 43, pp.559-567 crossref(new window)

22.
Gardon, Rand Akfirat, J.C., 1965, 'The Role of Turbulence in Determining the Heat Transfer Characteristics of Impinging Jets,' International Journal of Heat and Mass Transfer, Vol. 8, pp.1261-1272 crossref(new window)