Advanced SearchSearch Tips
Large Eddy Simulation of Turbulent Flow Inside a Sudden Expansion Cylinder Chamber
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Large Eddy Simulation of Turbulent Flow Inside a Sudden Expansion Cylinder Chamber
Seong, Hyeong-Jin; Go, Sang-Cheol;
  PDF(new window)
A large eddy simulation(LES) is performed for turbulent flow in a combustion device. The combustion device is simplified as a cylinder with sudden expansion. To promote turbulent mixing and to accommodate flame stability, a flame holder is attached inside the combustion chamber. Emphasis is placed on the flow details with different geometries of the flame holder. The subgrid scale models are applied and validated. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The calculated Reynolds numbers are 5000 and 50000 based on the bulk velocity and the diameter of inlet pipe. The predicted turbulent statistics are evaluated by comparing with the LDV measurement data. The agreement of LES with the experimental data is shown to be satisfactory.
Large Eddy Simulation;Physical Contravariant Velocity Component;Generalized Coordinate;Flame Holder;
 Cited by
Amano, K., Inage, S., Yamakata, M. Taniguchi, M., 1993, 'Numerical Simulation of Turbulent Pre-mixed Flame Around a Bluff Body Using the $\kappa-\varepsilon$ and Flamelet Models,' 9th Symp. on Turbulent Shear Flows, Kyoto, Japan

Sato, A., Shizawa, T. and Honami, S., 1991, 'Study on the Flow Behavior in a Dump Diffuser,' Trans. JSME, Vol. B57 (in Japanese), pp. 4029-4035

Ogata, H., Shizawa, T. and Honami, S., 1994, 'Study on Dump Diffuser Combustor,' Trans. JSME, Vol. B60 (in Japanese), pp. 4039-4044

Akselvoll, K. and Moin, P., 1996, 'Large-Eddy Simulation of Turbulent Confined Coannular Jets,' J. Fluid Mech., Vol. 315, pp. 387-411 crossref(new window)

Johnson, B. V. and Bennet, J. C., 1984, 'Statistical Characteristics of Velocity, Concentration, Mass Transport, and Momentum Transport for Coaxial Jet Mixing in a Confined Duct,' J. of Gas Turbines and Power, Vol. 106, pp. 121-127

Smagorinsky, J., 1963, 'General Calculation Experiments with the Primitive Equations. Ⅰ. The Basic Experiment,' Monthly Weather Review, Vol. 91, pp. 99-164 crossref(new window)

Germano, M., Piomelli, U., Moin, P., Cabot, W. H., 1991, 'A Dynamic Subgrid-Scale Eddy Viscosity Model,' Physics of Fluids, Vol. A3, 1991, pp. 1760-1765 crossref(new window)

Meneveau, C., Lund, T. S. and Cabot, W., 1994, 'A Largrangian Dynamic Subgrid-Scale Model for Turbulence,' Proceedings of the Summer Program (Center for Turbulence Research), pp. 1-29

Van Driest, E. R., 1956, 'On Turbulent Flow Near a Wall,' J. of the Aeronautical Sciences, Vol. 23, pp. 1007-1011

Piomelli, U., 1993, 'High Reynolds Number Calculations Using the Dynamic Subgrid-Scale Stress Model,' Physics of Fluids, Vol. A5, pp. 1484-1490

Akselvoll, K. and Moin, P., 1993, 'Large Eddy Simulation of a Backward Facing Step Flow, in Eng. Turb. Modelling and Exp. 2,' edited by Rodi, W. and Martelli, F., pp. 303-313

Eggels, J. G. M., Unger, F., Weiss, M. H., Westerweel, J., Adrian, R. J., Friedrich, R., Nieuwstadt, F. T. M., 1994, 'Fully Developed Turbulent Pipe Flow : A Comparison Between Direct Numerical Simulation and Experiment,' J. Fluid Mech., Vol. 268, pp. 175-209 crossref(new window)

Antonopoulos-Domis, M., 1981, 'Large-Eddy Simulation of a Passive Scalar in Isotropic Turbulence,' J. Fluid Mech., Vol. 104, pp. 55-79 crossref(new window)

Deardorff, J. W., 1970, 'A Numerical Study of Three Dimensional Turbulent Channel Flow at Large Reynolds Number,' J. Fluid Mech., Vol. 41, pp. 453-480 crossref(new window)

Mansour, N. N., Feriger, J., Reynolds, W. C., 1978, 'Large-Eddy Simulation of Turbulent Mixing Layer,' Rep. No. TF-11, Stanford University

Liepmann, D. and Gharib, M., 1992, 'The Role of Streamwise Vorticity in the Near-Field Entrainment of Round Jets,' J. Fluid Mech.., Vol. 245, pp. 643-668 crossref(new window)

Kobayashi, T. et. al., 1999, 'Modeling for Flow Simulation of Combustion Chambers, Rep. No. 8H-170-1, MEDO (in japanses), Japan