JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effects of Various Injection Hole Shapes and Injection Angles on the Characteristics of Turbine Blade Leading Edge Film Cooling
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effects of Various Injection Hole Shapes and Injection Angles on the Characteristics of Turbine Blade Leading Edge Film Cooling
Kim, Yun-Je; Gwon, Dong-Gu;
  PDF(new window)
 Abstract
Using a semi-circled blunt body model, the geometrical effects of injection hole on the turbine blade leading edge film cooling are investigated. The film cooling characteristics of two shaped holes (laterally- and streamwise-diffused holes) and three cylindrical holes with different lateral injection angles, 30°, 45°, 60°, respectively, are compared with those of cylindrical hole with no lateral injection angle experimentally and numerically. Kidney vortices, which decrease the adiabatic film cooling effectiveness, appear on downstream of the cylindrical hole with no lateral injection angle. At downstream of the two shaped holes have better film cooling characteristics than the cylindrical one. Instead of kidney vortices, single vortex appears on downstream of injection holes with lateral injection angle. The adiabatic film cooling effectiveness is symmetrically distributed along the lateral direction downstream of the cylindrical hole with no lateral injection angle. But, at downstream of the cylindrical holes with lateral injection angle, the distribution of adiabatic film cooling effectiveness in the lateral direction shows asymmetric nature and high adiabatic film cooling effectiveness regions are more widely distributed than those of the cylindrical hole with no lateral injection angle. As the blowing ratio increases, also, the effects of hole shapes and injection angles increase.
 Keywords
Film Cooling;Blunt Body Model;Shaped Hole;Lateral Injection Angle;Kidney Vortex;
 Language
Korean
 Cited by
 References
1.
Goldstein, R. J., 1971, 'Film Cooing,' Advances in Heat Transfer, Vol. 7, pp. 321-379

2.
조형희, '막냉각에서의 유동 및 열전달 특성, 2000, 대한기계학회 2000년도 유체공학부문 학술강연회 강연집, pp. 61-79

3.
Goldstein, R. J., Eckert, E. R. G., Burggraf, F., 1974, 'Effects of the Hole Geometry and Density on Three-Dimensional Film Cooling,' Int. J. of Heat Mass Transfer, Vol. 17, pp. 595-606 crossref(new window)

4.
Thole, K., Gritsch, M., Schulz, A., Witting, S., 1998, 'Flowfield Measurements for Film-Cooling Holes with Expanded Exits,' ASME J. of Turbomachinery, Vol. 120, pp. 327-336

5.
Reiss, H., Bolcs, A., 2000, 'Experimental Study of Showerhead Cooling on a Cylinder Comparing Several Configurations Using Cylinderical and Shaped Holes,' ASME J. of Turbomachinery, Vol. 122, pp. 161-169 crossref(new window)

6.
Thakur, S., Wright, J. and Shyy, W., 1999, 'Convective Film Cooling over a Representative Turbine Blade Leading-Edge,' Int. J. of Heat Mass Transfer, Vol. 42, pp. 2269-2285 crossref(new window)

7.
Bohn, D. E., Moritz, N., Kruger, U. and Kusterer, K., 2000, 'Numerical Analysis of Streamwise and Lateral Ejection of Cooling Fluid at the Leading Edge of a Turbine Blade Cascade,' Proceedings of the 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-8, Vol. II, pp. 793-800

8.
Walters, D. K. and Leylek, J. H., 2000, 'A Detailed Analysis of Film-Cooling Physics : Part Ⅰ-Streamwise Injection with Cylindrical Holes,' ASME J. of Turbomachinery, Vol. 122, pp. 102-112 crossref(new window)

9.
McGovern, K. T. and Leylek, J. H., 2000, 'A Detailed Analysis of Film-Cooling Physics : Part Ⅱ-Compound-Angle Injection with Cylindrical Holes,' ASME J. of Turbochinery, Vol. 122, pp. 113-121 crossref(new window)

10.
Hyams, D. G. and Leylek, J. H., 2000, 'A Detailed Analysis of Film-Cooling Physics : Part Ⅲ-Streamwise Injection with Shaped Holes,' ASME J. of Turbomachnery, Vol. 122, pp. 122-132 crossref(new window)

11.
Brittingham, R. A. and Leylek, J. H., 2000, 'A Detailed Analysis of Film-Cooling Physics : Part Ⅳ-Compound-Angle Injection with Shaped Holes,' ASME J. of Turbomachinery, Vol. 122, pp. 133-145 crossref(new window)

12.
Patankar, S. V., 1980, 'Numerical Heat Transfer and Fluid Flow,' Hemisphere, New York

13.
Garg, V. K. and Rigby, D. L., 1999, 'Heat Transfer on a Film-Cooled Blade-Effect of Hole Physics,' Int. J. of Heat and Fluid Flow, Vol. 20, pp. 10-25 crossref(new window)