JOURNAL BROWSE
Search
Advanced SearchSearch Tips
The Study on the Gas Temperature Set by Calculating the Sensitivity of Slab Temperature in Reheating Furnace
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The Study on the Gas Temperature Set by Calculating the Sensitivity of Slab Temperature in Reheating Furnace
Gang, Deok-Hong; Kim, Gi-Hong; Lee, Yong-Guk;
  PDF(new window)
 Abstract
A new mathematical model to determine the optimal gas temperatures in reheating furnace was proposed for the good quality of products. This model employs sensitivity method to calculate the optimal gas temperatures in each zone for heating the slab up to its discharging target temperature and for heating it uniformly. This method was validated by showing that the calculated discharging temperature of the slab was in a good agreement with its prescribed discharging target one through an off-line simulation.
 Keywords
Slab;Reheating Furnace;Residence Time;Gas Temperature;The Total Heat Exchange Factor;Moving Beam;Fixed Beam;
 Language
Korean
 Cited by
1.
역해석을 이용한 가열로 내 소재의 1차원 열유속 추정에 관한 연구,강덕홍;곽동성;김우승;이용국;

대한기계학회논문집B, 2003. vol.27. 1, pp.61-68 crossref(new window)
 References
1.
Ishida, R,Matsuura, Y., Sawae, M. and Ohtomo, A., 1983, R & D 神戶制鋼技報, Vol. 33, No. 4, p. 81

2.
Veslocki, T. A.,Smith, C. C. and Kelly, C. D., 1986, Automatic Slab Heating Control at INLAND'S 80-IN. HOT STRIP MILL, Iron & Steel Engineer, Vol. 63, No. 12, pp. 47-54

3.
Lee, G. S., Yoo, E. J. and Song, D. I., 1985, HWAHAK KONGAK 23, 137

4.
若宮宣範, 住野知子, 1982, 三菱電機技報, Vol. 59, No. 4, p. 294

5.
Hollander, F. and Zuurbier, S. P. A., 1982, 'Design, Development and Performance of On-Line Computer Control in a Three-Zone Rehrating Furnace, Iron & Steel Engineer, Vol. 59, No. 1, pp. 44-52

6.
Masamoto Kamata, Tatsuo Kuraishi, etc., 1979, 'Computer Control System for Continuous Reheating Furnace of Hot Strip MI11,' No. 82, pp. 38-46

7.
Naoharu Yoshitani, Youichi Naganuma, and Toshio Yanai, 1991, Optimal Slab Heating control in Reheating Furnaces, Nippon Steel Technical Report, No. 49, pp. 45-50

8.
Hollander, F. and Zuurbier, S. P. A., 1985, 'Accurate Temperature Control of the Reheating Process at Mixed Cold and Hot Charging,' Proceedings of the International Conference on Process Control and Energy Saving in Reheating Furnaces, Vol. 36, No. 6, pp. 1-6

9.
강덕홍, 김기홍, 1998, '후판가열로 연소제어 수식모델 성능향상 연구,' RIST 연구보고서(98A309)