JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Treatment of Pickling Wastewater from Electroless Nickel Plating by Soluble Electrode and Insoluble Electrode
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Treatment of Pickling Wastewater from Electroless Nickel Plating by Soluble Electrode and Insoluble Electrode
Kim, Young-Shin; Jeon, Byeong-Han; Koo, Tai-Wan; Kim, Young-Hun; Cho, Soon-Haing;
  PDF(new window)
 Abstract
In order to treat electrolysis nickel plating pickling wastewater to meet the effluent limit less than 3.0 mg/L, the electrolysis process by using soluble and insoluble electrode were studied. Electrolysis using soluble electrodes has a characteristic of easy elution from the electrode which the insoluble electrodes close not release metal from the electrode. For these reasons, there exist different characteristics in nickel removal efficiency, purity of nickel sludge. With this connection, the feasibility test were concluded to develop optimal conditions for the treatment of pickling wastewater electrolysis by using soluble electrodes, insoluble electrodes. Optimal condition of current density, pH were derived from the pickling wastewater using insoluble electrodes. It was concluded the highest removal efficiency of nickel at the operation condition of at pH 9, current density of . At these conditions, 95.3% purity of nickel sludge was achieved, iron content was 2.9%. Optimal condition when using soluble electrodes was derived current density of , pH 9. Purity of nickel sludge was 77.3%, iron content was 21.0%. 50.7% and 24.2% of operating cost can be saved by the use of soluble electrodes and the use of insoluble electrodes, respectively.
 Keywords
Insoluble Electrode;Soluble Electrode;Electrolysis;Nickel;Electroless Plating Wastewater;
 Language
Korean
 Cited by
 References
1.
Kim, C.-Y., "A study on pollutants removal for wastewater from electroless plating process," University of Seoul(2013).

2.
Nam, W.-K., "A Study on the plating rate and the deposit characteristics of the electroless nickel plating according to the plating conditions," Inha University(2010).

3.
Lee, H.-Y.,, "Recovery of nickel from electroless plating wastewater by electrolysis method," J. Korean Inst. Resour. Recycl., 21(2), 41-46(2012).

4.
Ministry of Environment, "Water quality and aquatic ecosystem conservation act,"(2015).

5.
Kim, Y.-S., Jeon, B.-H. and Cho, S.-H., "Optimization of electrolysis using sacrificial electrode for the treatment of electroless nickel plating wastewater," J. Korean Soc. Environ. Eng., 37(4), 204-209(2015). crossref(new window)

6.
Chung, H.-J., "A study on the removal of cyanide and heavy metals in plating wastewater," KSWST J. Water Treatment, 21(2), 47-57(2013).

7.
Lee, S.-B., "Recovery of nickel from electroless nickel plating waste liquid," Chungbuk National University(2015).

8.
Akbal, F. and Camci, S., "Copper, chromium and nickel removal from metal plating wastewater by electrocoagulation," Desalination, 269, 214-222(2011). crossref(new window)

9.
Song, Y.-J., Lee, G.-S., Kang, H.-S., Kim, Y.-C., Seo, B.-W. and Yoon, S.-N., "Adsorption of heavy metals on sludge from the treatment process of acid mine drainage," J. Korean Inst. Resour. Recycl., 21(4), 35-43(2012). crossref(new window)

10.
Adhoum, N., Monser, L., Bellakhal, N. and Belgaied, J. E., "Treatment of electroplating wastewater containing $Cu^{2+}$, $Zn^{2+}$ and Cr(VI) by electro-coagulation," J. Hazard. Mater., B112, 207-213(2004).

11.
Shin, S.-J. and Kim, D.-H., "Electrolysis of plating waste water," J. Korean Saf., 9(1), 95-99(1994).