Advanced SearchSearch Tips
The Improved Quasi-3D FE Analysis on the AFPM Motor
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The Improved Quasi-3D FE Analysis on the AFPM Motor
Woo, Dong-Kyun;
  PDF(new window)
In the quasi-3D finite element(FE) anlysis, the overall characteristics of axial flux permanent magnet(AFPM) motor could be composed of each computation region. However, A drawback of quasi-3D FEM is not to consider the end effect on the stack end. To address this problem, an improved quasi-3D FE analysis which considers the end effect of the AFPM motor was proposed. From results the 3D FE analysis, the validity of the proposed method is verified.
Axial flux permanent magnet motor;End effect;FEM;Improved quasi-3D FEM;Quasi-3D FEM;
 Cited by
J. F. Gieras, R. J. Wang, and M. J. Kamper, "Axial flux permanent magnet brushless machines," Springer, 2008.

D. K. Woo, J. H. Choi, M. Ali, and H. K. Jung, "A Novel Multimodal Optimization Algorithm Applied to Electromagnetic Optimization," IEEE Trans. Magn., vol. 47, no. 6, pp. 1667-1673, Jun. 2011. crossref(new window)

J. F. Gieras, and M.Wing, "Permanent Magnet Motor Technology-Design and Applications" New York, 1997.

R. Qu, and T. A. Lipo, "Analysis and modeling of air-gap and zigzag leakage fluxes in a surface-mounted permanent-magnet machine," IEEE Trans. Magn., vol. 40, no. 1, pp. 121-127, Jan. 2004.

G. Cvetkovski, L. Petkovska, M. Cundev, and S. Gair, "Quasi 3D FEM in function of an optimization analysis of a PM disk motor," in Proc. Int. Conf. Electrical Machines, Helsinki, Finland, vol. 4, pp. 1871-1875, Aug. 2000.

C. B. Rasmussen, and E. Ritchie, "A magnetic equivalent circuit approach for predicting PM motor performance," in Conf. Rec. IEEE IAS Annu. Meeting, pp. 10-17, 1997.

J. Perho, "Reluctance network for analysing induction machines," Ph.D. dissertation, Dept. elect. Eng., Helsinki Univ. Technol., Helsinki, Finland, 2002.

D. K. Woo, D. K. Lim, and H. K. Jung, "Rotor design strategy of interior permanent magnet synchronous motor for fuel cell electric vehicle," IJAEM, vol. 40, no. 1, pp. 51-66, Sep. 2012.

D. K. Lim, D. K. Woo, I. W. Kim, J. S. Ro, and H. K. Jung, "Cogging Torque Minimization of a Dual-Type Axial- Flux Permanent Magnet Motor Using a Novel Optimization Algorithm," IEEE Trans. Magn., vol. 49, no. 9, pp. 5106-5111, Sep. 2013. crossref(new window)

D. K. Woo, I. W. Kim, D. K. Lim, J. S. Ro, and H. K. Jung, "Cogging Torque Optimization of Axial Flux Permanent Magnet Motor," IEEE Trans. Magn., vol. 49, no. 5, pp. 2189-2192, May. 2013. crossref(new window)