Advanced SearchSearch Tips
Optimal Printing Conditions of PLA Printing Material for 3D Printer
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Optimal Printing Conditions of PLA Printing Material for 3D Printer
You, Do-Hyun;
  PDF(new window)
The purpose of this study optimizes the conditions of PLA printing material for 3D printer. Deltabot type 3D printer is used. The ranges of printing temperature, printing speed, and infill density are , 10~70mm/sec, and 10~100% respectively. From the results of printing temperature, printing quality is almost same every printing temperature. From the results of printing speed and infill density, printing quality is excellent under 40mm/sec, and over 50% respectively. Surface roughness is at , 10mm/sec, 100%, and is at , 70mm/sec. Surface roughness is directly proportional to the printing speed, and is inversely proportional to the infill density. Objects fabricated PLA printing material adhere bed at room temperature.
PLA printing material;3D printer;Deltabot type;Printing temperature;Printing speed;Infill density;Surface roughness;
 Cited by
C. H. Ahn, "3D Printer", Codmedia, pp.14-15, 2014.

S. H. Roh, "3D Printer Practical Use Guide Book", Mechapia, pp. 1-10, 2014.

IRS Global, "3D Printing(Printer, Material) Market, Technology Forecast and Business Strategy of Domestic and Foreign Participating Enterprise", IRS Global, pp. 1-10. 2013.

M. S. Song, "Preparation and Characteristics of PLA/ Chitosan Composites and Nanofibers", Dankook Univ., Master's Thesis, pp. 1-5, 2003.