Paul Woolford and Anne Blakeney, Technical Requirements for Axle Counters, Railway Group Standard GK/RT0217, Railway Safety, Feb. 2003.
BSI Standards Publication, Railway Applications - Compatibility between rolling stock and train detection systems -, Part 3 : Compatibility with axle counters, DD CLC/TS 50238-3-2010, 2010.
Martin Rosenberger, "Future Challengers to Axle Counting Systems," Institution of Railway Signal Engineers (IRSE), 2012.
Honeywell, Train sensing that keeps you on the right track, MICRO SWITCH Sensing and Control, 2014.
Jae-Young Park and Jin-Woo Choi, "A Study of the Apply Proximity Sensor for Improved Reliability Axle Detection," Journal of the Korea Academia-Industrial Cooperation Society, Vol. 16, No. 8, pp. 5534-5540, 2015.
Vinay Polepalli and M Anil Kumar, "Solid State Block Proving By Axle Counter (Digital)," International Hot Box Detector for the Measurement Position Train Wheel," KSME, Proc. of Spring, April 2014.
V. Kasik and M. Tutsch, Simulation and Measurement of Axle Counter with FPGA, Department of Cybernetics and Biomedical Engineering, Technical University of Ostrava, 2012.
Jae Sik Choi, Hie Sik Kim, Jun Young Go, and Jong Hyun Lee, "A Study on Design Axle Counter with Hot Box Detector for the Measurement Position Train Wheel," KSME, Proc. of Spring, April 2014.
InChang Yeo, SungChan Rho, and YongHo Kim, "Axle counter system oscillation stabilization circuit," The Korean Society of Railway, Proc. of Spring, May 2015.
JinHo Shin, SukHan Yoon, JaeSik Choi, JaeWoo Lim, HyungTae Lim, and SooYoung Kwak, "Research on Development of HBD Velocity Simulation Device using a Rotor," The Korean Society of Railway, Proc. of Spring, May 2013.
Benedetto Allotta, Pierluca D'Adamio, Alice Innocenti, Enrico Meli and Luca Pugi, "An innovative algorithm for train detection," IEEE, Conf. of Instrumentation and Measurement Technology, pp. 1057-1062, July 2015.
V. Pavithradevi, D. Roopini, Rumana Vaseela Abdul Aleem, and V. Solai Shree, "Identification of the Presence of Train and its Formation," International Journal of Innovative Research in Science, Vol. 3, Special Issue 2, April 2014.
Ali Zamani and Ahmad Mirabadi, "Analysis of sensor orientation in Railway axle counters, using Response Surface Methodology," Symposium on Advances in Science & Technology(SASTech), May 2011.
S. C. Singhal, Maintenance Handbook on Digital Axle Counter, CAMTECH, Dec. 2008.
Gerhard Grundnig and Christian Pucher, State of the art in wheel detection, White Paper, Frauscher Sensortechnik, June 2012.