Publisher : The Korean Welding and Joining Society
DOI : 10.5781/JWJ.2015.33.5.20
Title & Authors
Clad Steel for Application of Hull Structure Shin, Yong-Taek;
Clad steel has good corrosion resistance and mechanical properties arising from the hot rolling of dissimilar metals, such as carbon steel and stainless steel. However both good corrosion resistance from the cladding plate material(stainless steel) and mechanical properties from the base plate material (carbon steel) are difficult to obtain because the different steels display opposite behaviors during the cladding process. In order to make clad steel for application in the hulls of ships, proper materials selection and heat-treatment conditions are necessary. In this study, mechanical properties of base plate materials with different chemical composition were evaluated according to heat condition of cladding plate material.
Lopez, N. Cid, M. Puiggali, M., Influence of sigma-phase on mechanical properties and corrosion resistance of duplex stainless. Corrosion Science, 41 (1999), 504-520.
Tan, H., Jiang, Y., Deng, B., Sun, T., Xu, J., & Li, J., Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750. Materials Characterization, 60(9)(2009), 1049-1054
ASTM A312/312M-01a, Standard specification for Seamless, Welded and Heavily Cold Worked Asutenitic Stainless Steel Pipes. ASTM International.
ASTM A790/A790M-05a, Standard Specificaiton for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipes. ASTM International
ABS rules for Material and Welding 2005, Pt. 2, American Bureau of Shipping
Charles, J.H., The duplex stainless steels: materials to meet your needs. Proceedings of the Conference 'Duplex stainless steel '91', Beaune. France. 1 (1991), 3-48
J.O. Moon,C.H.Lee, Precipitation and Precipitate Coarsening Behavior According to Nb Addition in the Weld HAZ of a Ti-containing Steel, J. of KWJS, 26 (1) (2008), 76-82 (in Korean)
G. R. Wang, T. W. Lau, G. C. Weatherly, T. H. North, Weld thermal cycle and precipitation effects in Ti-V-containing HSLA steels, Metall. Trans. A20 (1989), 2093-2100
J. Fermandez, S. Illnescas, J.M.Guilemany, Effect of microalloying elements on the austenitic grain growth in a low carbon HSLA steel, Materials Letters, 61 (2007), 2389-2392
S.J. Lee, Y.K. Lee, Prediction of austenite grain growth during austenitization of low alloy steels, Materials and Design, 29 (2008), 1840-1844
G.C.Hwang, S.H.Lee, J.Y.Yoo,W.Y.Choo, Effect of direct quenching on microstructure and mechanical properties of copper-bearing high-strength alloy steels, Materials Science and Engineering A, 252 (1998), 256-268
S.K.Dhua, A.Ray, D.S.Sarma, Effect of tempering temperature on the mechanical properties and microstructure of HSLA-100 type copper-bearing steels, Materials Science and Engineering A, 318 (2001), 197-210